hi everyone ,
i need eprom dump vestel 17mb211s mainboard
thanks george
i need eprom dump vestel 17mb211s mainboard
thanks george
-
Hi all,
First time trying to fix a TV for a friend, it's a Bush DLED32165HD.
Power Board - 17IPS11
Mainboard - 17MBS82S
Panel - VES315WNDB-02
Red blinking standby light is on steady, press power button on remote and light flashes 7 times then stays steady, press power on remote again light flashes 10 times and then goes off.
Checked all the voltages on the power board inc backlight circuit, they all read ok and are stable. Backlights tested with backlight tester and all work fine (2 strips x11LED on each).
No picture, backlight or sound just blinking... -
Chassis vestel 17mb110p
Panel:ves430undl-2d-n12
Make Toshiba 43l3733dg
Does someone have a dump file for the main board 17mb110p ?
regards and thanks in advance -
Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
spero che qualcuno può averlo per riprogrammare eprom. grazie
Post in English !!!
I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
hi guys, im a engineer with over 30 years experiance i have the ability to dump nand and spi via removal . but i work for a company where we get all JVC sets and logik tvs from currys returns as faulty so i repair alot of the faulty tv's with firmware corrupted files. bad sectors and such,
as we deal with latest models from 19 - 65" models. i can share all firmware from latest sets as well. just need a little help on how to.
such as how to download full nand and spi via telnet commands i get to putty and get into vestel via telenet easy enough, get to this stage,...