tv is digihome ptdr24hds3
vestel mb211s
panel ves236wnvc 2d n12
thanks if anyone can help .have been searching for days now .
vestel mb211s
panel ves236wnvc 2d n12
thanks if anyone can help .have been searching for days now .
-
-
Re: looking for recovery firmware usb
hope not as other post he thought FW but it look he had HW... so tell us first how you come to diagnose you need FW..
with my respect to you... many black sheep's collect vestel recovery firmware and sold them on ebay.. -
Re: looking for recovery firmware usb
i have a thread about it .
https://www.badcaps.net/forum/showthread.php?t=86826Comment
-
Re: looking for recovery firmware usb
click
the same link what did you found before open it in original not translate...
go down to (( 17MB211 17MB211S Yazılım Dosyaları )) you have 5 google drive links to downloadComment
-
Re: looking for recovery firmware usb
no i am struggling with downloading anything .. its asking me to use various extractors and nothing will work . i normally download zip files then extract to usb with my pc zip tool .Comment
-
Re: looking for recovery firmware usb
all i find is what i got first ....https://drive.google.com/file/d/1FHt...IM9xHZ4G7/viewComment
-
Re: looking for recovery firmware usb
Vestel QUI Core V.3.19.1
cant find the other 2 files it mentionsComment
-
Re: looking for recovery firmware usb
yes i have that but doesn't it say the tv needs to work first for that ?Comment
-
Re: looking for recovery firmware usb
MBOOT and NFC no need.... yours tv are starting.. if tv no start and no BL then rewrite mbootComment
-
Re: looking for recovery firmware usb
17MB211 17MB211S Full Software Installation Method:
the shredder_usb_update.b
shredder_usb_update.sc is
Copy the named files into the empty and formatted FAT32 USB stick.Comment
-
Re: looking for recovery firmware usb
where do i find those files ?Comment
-
Re: looking for recovery firmware usb
the .bin file put it on usb drive formated fat32 and insert it in tv while its pluged out from wall socket#
press ok on RC and keep press , while you press ok plug it in wall socket and remain press ok until the led blink slowlyComment
-
Re: looking for recovery firmware usb
yes i tried that and nothing changes . will try again now but press ok for longer and then see ...
still dont know about those 2 files though .they are looking like whats needed .Last edited by petehall347; 07-25-2020, 12:17 PM.Comment
-
Re: looking for recovery firmware usb
on TV use usb port 1 onlyComment
-
Re: looking for recovery firmware usb
it only has one usb port .. its not doing it still . all i get is light on on my usb card reader and 7 blinks from standby light and backlights on which it repeats 3 times over .
i even tried channel plus button as it says in the manual .Last edited by petehall347; 07-25-2020, 12:56 PM.Comment
-
Re: looking for recovery firmware usb
manual says this .....
How to Install 17MB211 17MB211S Software?
17MB211 17MB211S Update Software Installation Method:
In this method, the television must be running.
well i dont think the tv is running ..Last edited by petehall347; 07-25-2020, 01:01 PM.Comment
-
Re: looking for recovery firmware usb
i want to try this way ...
17MB211 17MB211S Full Software Installation Method:Comment
-
-
Hey Folks,
I'm searching for a Full Flash Recovery Software
for my Telefunken D43F287N4CWII
Mainboard Vestel 17MB110S
Panel: VES430UNDB-2D-N12
Productcode: 10119394
Does anyone know, where I can get it ?
Or is it possible, to extract it from a working mainboard ?
The Support Telefunken/Vestel GER couldn't help me.
The Vestel TR Support didn't answer my email.
History:
The main problem with my Telefunken D43F287N4CWII was,
it just goes out after a while, sometimes after a... -
Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
spero che qualcuno può averlo per riprogrammare eprom. grazie
Post in English !!!
I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you
-
Hello, i have an old Toshiba 32W1333DN (sorry, misspelled the headline) TV that had the standby led green/red flashing and no lightup problem, i repaired it by measure the led output as suspect led problem, i measured the LED:s one by one and found one bad led, i replaced the the led-straps and the TV works.
Now i need to update the software because the new rc "RM-L890" does not work and i think maybe it could be an firmware issue?, i have struggled to find it without any success because all of the links where invalid, i contacted Toshiba but they do not support this model... -
Hi,
Got a Finlux 65-FUC-8060 TV that doesn't turn on, 5V standby present from PSU, 3.3V on mainboard present, button signal gets pulled low when pressed, but mainboard never sends signal to PSU to turn main rails on.
I suspect corrupt firmware but I haven't been able to find anything for this TV.
TV model: Finlux 65-FUC-8060
Mainboard: Vestel 17MB130S 23473048
Panel: VES650QNTS-2D-U11
At the very least looking for a firmware that can make it turn on to confirm the problem, and hopefully a firmware that's compatible with the panel. -
Hello to everyone ,
This is my first post here, and i would like to share with you a small story in case you can help me.
Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.
All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work
I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...02-10-2024, 02:07 PM
Comment