Hi everyone! I am new to this forum and have been trying to pick up different tips from the many threads.
I am completely new to this, first time opening a LG set or LED TV for that matter. What made me open the TV is:
The set initially turned on for a second flashed the LG logo and then turned off. The standby light blinked a few times. So, I figured it was a bad LED. Ended up finding one bad LED but I changed all the strips.
When I put everything back together and turned on the TV a gray bar shows up on the right side. After looking at the ribbon that connects the T-con to the driver board it seems one of the pins is bent/messed up.
Do you think if i just change that ribbon it may work? It is very tough to find just the ribbon connectors.
Thanks for the help!
Can't embed the images for some reason: https://imgur.com/a/WB4mze5
I am completely new to this, first time opening a LG set or LED TV for that matter. What made me open the TV is:
The set initially turned on for a second flashed the LG logo and then turned off. The standby light blinked a few times. So, I figured it was a bad LED. Ended up finding one bad LED but I changed all the strips.
When I put everything back together and turned on the TV a gray bar shows up on the right side. After looking at the ribbon that connects the T-con to the driver board it seems one of the pins is bent/messed up.
Do you think if i just change that ribbon it may work? It is very tough to find just the ribbon connectors.
Thanks for the help!
Can't embed the images for some reason: https://imgur.com/a/WB4mze5
Comment