Samsung LED UN46H5203 No Backlights

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • neilc6
    Badcaps Legend
    • Nov 2015
    • 1550
    • Canada

    #21
    Re: Samsung LED UN46H5203 No Backlights

    These are likely your strips. https://ebay.us/mJY3Cw You need to take apart the panel and confirm the part number. For $30 USD, not sure how much money you want to save.

    I typically see 50 to 90% of LEDs dead on this model and always do a full replacement. The open circuit saved the remaining ones but they all have wear and are likely to fail.

    Here is a pic of UN40H5203 bad backlights.
    Attached Files
    Last edited by neilc6; 02-13-2020, 08:20 PM.

    Comment

    Related Topics

    Collapse

    • Document Archive
      MSI Stealth 17 STUDIO A13V-022 Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the MSI Stealth 17 STUDIO A13V-022 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 17 STUDIO A13V-022 boardview and 17 STUDIO A13V-022 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
      09-07-2024, 06:31 AM
    • max789
      Samsung UE48H6410 replaced Mainboard but backlights doesnt go on
      by max789
      Hello, I have a problem with my Samsung UE48H6410SSXZG with the main board BN41-02156A and the power board BN44-00709A. Everything seemed like this, the TV could no longer be switched on, the standby LED always flashed 5x2 times. Backlight was off and no sound from TV. Also made the flashlight test and there was no picture.

      I made the following tests:
      1. Disconnected the main board from Power Board = backlight works.
      2. Connected the main board and disconnected the T-Con = backlights does not work.

      So I ordered a main board from Ebay also BN41-02156A but from...
      01-18-2024, 06:56 AM
    • soler88
      Samsung UN46H5203 backlight issue - stumped
      by soler88
      I am trying to fix this tv that has image and sound but no backlight. Replaced all led strips and each strip turns on using a led tester but do not get any backlight when the tv turns on.
      I disconnected the main board from the PS but still no backlight.

      Looking at previous threads, nothing is jumping out at me and I'm stumped.

      Here are the voltage measurements:
      ON STATE

      CNM803 on PSU from Main

      Pin 1 A13v - 13.09v

      Pin 2 OD_UD - 3.3v

      Pin 3 A13v - 13.09v

      Pin 4 BLU_PWM - 1.6v

      Pin 5 A13v...
      10-09-2024, 07:28 AM
    • Document Archive
      MSI Creator Z17HXStudio A13V Notebook Z17 HX Studio Specification for Upgrade or Repair
      by Document Archive
      This specification for the MSI Creator Z17HXStudio A13V Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Z17HXStudio A13V boardview and Z17HXStudio A13V schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
      09-07-2024, 06:38 AM
    • bstewara
      Samsung un49mu7000f dead no power
      by bstewara
      Hi.
      I'm working on a Samsung UN49MU7000F that has no standby LED indicator.
      No POWER
      The power supply board is part number BN44-00876A
      The main board number is BN94-12399A
      I am stuck.
      I have replaced both pwr supply and main board with no changes.
      Here are some of the readings from my multi meter on various locations on my power supply

      MAIN BOARD UNPLUGGED. BACK LIGHTS ON PLUG CNL802 85 volts
      Backlights are all illuminated and in operating range.

      MB PLUG CNM803. - UNPLUGGED

      PIN 1 FAN COUNT - Open...
      10-08-2021, 06:42 AM
    • Loading...
    • No more items.
    Working...