Sanyo DP50747

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • itronic
    Senior Member
    • Sep 2015
    • 82
    • usa

    #1

    Sanyo DP50747

    This tv once turned on , makes a 1 click then another click comes on for 6 to 10 seconds shows image and sounds then shuts off. Then clicks again and shuts of in 3 sec with no image or sounds. Keeps doing this. I Did the self test with the logic board and the main board unhooked. It shows all the colors and pattern test fine. Never shuts off. So i order a main board.

    Second main board installed and it did same thing. Made one click then few seconds another click. Tv comes on with sound and video then shuts down and does the 3 sec click on and off thing.

    I'm guessing bad main boards. Just figured i would ask for some input before ordering another board.

    Self Test i did https://www.youtube.com/watch?v=IXXSdctd7Y8

    Main board front(https://assets.shopjimmy.com/media/c...j4de-top_2.jpg)
    Main board back (https://assets.shopjimmy.com/media/c...e-bottom_2.jpg)
    Last edited by itronic; 02-04-2020, 11:32 AM.
  • itronic
    Senior Member
    • Sep 2015
    • 82
    • usa

    #2
    Re: Sanyo DP50747

    Follow up. Still having issues. i have replace 3 main boards. 2 was bad.
    This last main board. work good for like 1 min to 2 min. Then click out and came on again.
    Then just keep clicking on and off. Anyone have any suggestion. Thanks

    By doing the Self test above. It has to be mainboard right.
    Last edited by itronic; 02-19-2020, 09:42 AM.

    Comment

    • itronic
      Senior Member
      • Sep 2015
      • 82
      • usa

      #3
      Re: Sanyo DP50747

      Just a follow up. Tv is working now. The only thing Self test shows is panel okay with images and stuff. Does not show if you have a problem with power board completely.

      Had to change 5 caps on power board and one on X board.

      Comment

      Related Topics

      Collapse

      • Dani_2024
        Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
        by Dani_2024
        Hi and thanks in advance for any input you might provide!
        I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
        Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

        Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
        10-28-2024, 05:06 PM
      • jb_Bak
        Sony xbr-65x900c main board issues?
        by jb_Bak
        Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

        Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
        Power Board Connector that goes to Main board
        CN6401
        Pin 01 NC
        Pin 02 NC
        Pin 03 "BL_ON": 0V
        Pin 04 "N/C"
        Pin 05 "STBY 3.3V": 3.5V
        Pin 06 "GND": N/C
        Pin 07 "AC_OFF"...
        09-27-2021, 04:52 PM
      • JDC
        (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
        by JDC
        ONN 100012588
        Issue: No Power, Then Rebooting After Main Board Change

        Short answer: replace main board and power board
        Technical answer: replace main board and Q306 & Q307 on power board.

        Long answer:

        TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
        07-15-2022, 07:39 AM
      • m1ch43lzm
        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
        by m1ch43lzm
        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
        05-12-2025, 08:37 PM
      • cheeky2
        Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
        by cheeky2
        I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
        Obviously the same LVDS connector for the screen connection...
        05-25-2024, 03:27 AM
      • Loading...
      • No more items.
      Working...