Re: LG 60pv400 gets faint image on screen for 2 seconds
I've never had him repair anything for me, I just bought transistors from him.
I've never had him repair anything for me, I just bought transistors from him.
-
-
Re: LG 60pv400 gets faint image on screen for 2 seconds
I got all the igbt's that were shorted removed and replaced.put everything back together and still no image.so after pulling the z and y sus board back out and retesting everything and with the suggestion from tvtimmy I did the jumper test on the logic board again and what ya know colors started coming on the screen.
I'm waiting on a replacement main board now so I took a heat gun to the bga chip for 45 seconds,put everything back together.
A big thanks to tvtimmy for all his help.
I know the heat to the bga chip is a temporary solution that's why I went ahead and ordered a new board.
Also to note the black lines where due to me not having the panel ribbon cables seated properly.Attached FilesComment
-
-
Hi everyone,
I was giving this ASUS ROG G750JM that exhibit the following behavior:
When you press the power button, the computer turns with no image and turn it's off within 7 seconds. The battery charges when I connect the AC power. I tried flashing the bios with the uSB method and pressing Ctrl + Home and I can see the bios upgrade on external monitor.
My issue is the laptop doesn't stay on for a long time and turn itself off.
Any lead on how to resolve this will be appreciated.
I cannot boot in windows and no liquid damage.
Thanks in advance. -
This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...09-12-2024, 02:20 PM
-
Hi folks
Like the title says, Initially the device didn't have image, turned it was a backlight connector problem. I shone light into the LCD there was clear image, only dark
After soldering new BL connector, the backlight works perfectly. Here is the big F up. During plugging lcd connector, I bent some pins unknowingly.
Put it back together, turned it on, surprised, backlight is on but there is no image now. Well, sort off. I i see carefully there is faint image resembling normal one, but only on right part on the screen albeit really hard to make it out.... -
Hi,
I don't know if someone can help me, but I'm going to give it a try anyway! I made sure to look up my issue before posting, but I couldn't find any thread for this TV model. I should also mention that I never fixed a TV before, please bear with me!
My Toshiba 43LF621U19 REV. B started acting up lately. I tried looking up its "symptoms" online, but I can't seem to find anyone experiencing the same problem, which makes it hard to figure out if this can be fixed and/or which part(s) should be replaced.
The TV was purchased brand new in June 2019.... -
This specification for the HP ProBook 450 G6 + Image Load, Asset Tag & Testntag Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 450 G6 + Image Load, Asset Tag & Testntag boardview and 450 G6 + Image Load, Asset Tag & Testntag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps...09-06-2024, 10:56 AM
Comment