hello, I'm looking for the telefunken led TV firmware TE32282B301C10D main vestel 17MB82-S
thanks
thanks
-
-
Re: tv led tfk need firmware
Google search there, most of it is not in English: https://www.google.com/search?client...10D%2BfirmwareLast edited by nomoresonys; 12-20-2019, 03:50 AM. -
Re: tv led tfk need firmware
Hi.
Non panel firmware : https://yadi.sk/d/zW7ePcnasMYM7Q
Recovery firmware : https://yadi.sk/d/Vfrtwua7NKOoHA
If you need panel files send me a pm.Last edited by arizanotlari; 12-20-2019, 06:17 AM.https://www.badcaps.netComment
-
Re: tv led tfk need firmware
thanks for the answer, this TV only turns on the backlight, without the image, I don't know if the panel firm is also needed, let me know. panel: ves315wndl-2d-n02
thank youLast edited by poweron; 12-20-2019, 07:54 PM.Comment
-
Re: tv led tfk need firmware
Panel files installing via service menu. Write sn code for full firmware.https://www.badcaps.netComment
-
Re: tv led tfk need firmware
where can i find the sn code?Comment
-
Re: tv led tfk need firmware
https://www.badcaps.netComment
-
Re: tv led tfk need firmware
thisAttached FilesComment
-
-
Re: tv led tfk need firmware
Main Sw : https://yadi.sk/d/8pDAIiydGWW40Q
Panel files : https://yadi.sk/d/SZxsEEF13beyOAhttps://www.badcaps.netComment
-
Re: tv led tfk need firmware
which of the two should I load on U12? should it be put on a USB key or can I program with CH314A?Comment
-
Re: tv led tfk need firmware
The software received above is for the stick not for the programmer. It is an installation procedure. Do you know?Comment
-
Re: tv led tfk need firmware
yes I understand, so since I have already unsoldered U12 I am looking for a bin file to programComment
-
Re: tv led tfk need firmware
Try. Only the board has 2 memories.Comment
-
Re: tv led tfk need firmware
does this file go on U12 or U10?Comment
-
Re: tv led tfk need firmware
In the archive are 2 software. For 25Q16 and 25Q64. On the motherboard are 2 memories: 25Q16 and 25Q64. Each memory is written with the dedicated software.Last edited by yokoono; 12-22-2019, 10:13 PM.Comment
-
Re: tv led tfk need firmware
ok, that's clear, the file that I posted contains the software for U10 and U12? so can I load it on a stik and then insert it on the mainboard?
thanksComment
-
Re: tv led tfk need firmware
1. What I posted contains soft bin for U10 and separately for U12
2. These software are written with the programmer
3. Writing can be done directly on the board using rt809h
4. Writing can be done directly on the board using ch341 and a special adapter
5. Writing can be done on the memories detached from the board.
YOU REQUESTED SOFTWARE FOR U12 MEMORY.
THESE BINS CANNOT BE WRITTEN ON MEMORIES DIRECTLY FROM THE STICK WITHOUT PROGRAMMER
1. Quello che ho pubblicato contiene un bin per U10 e separatamente per U12
2. Questi software sono scritti con il programmatore
3. La scrittura può essere effettuata direttamente sulla lavagna usando rt809h
4. La scrittura può essere effettuata direttamente sulla lavagna utilizzando ch341 e un adattatore speciale
5. La scrittura può essere fatta sui ricordi staccati dalla lavagna.
RICHIEDI IL SOFTWARE PER LA MEMORIA U12.
QUESTE SOFTWARE NON POSSONO ESSERE SCRITTE SUI MEMORIE DIRETTAMENTE DAL STICK SENZA PROGRAMMATORELast edited by yokoono; 12-23-2019, 08:45 AM.Comment
-
Re: tv led tfk need firmware
that's right, I also have a CH341A programmer to program memories like U12 and others via adapter, which is why I'm looking for a bin file for U12Comment
-
Re: tv led tfk need firmware
What's so complicated?
1. Read what is written on memory U12: 25Q16 (2Mb) or 25Q64 (8Mb)
2. Save what I posted above (# 13)
3. Unzip
4. You have there bin for 25Q16 and 25Q64.
5. Rewrite the memory with the respective bin. It is advisable to rewrite both memories.
This is the last time I post here.Last edited by yokoono; 12-23-2019, 11:30 PM.Comment
-
Hey Folks,
I'm searching for a Full Flash Recovery Software
for my Telefunken D43F287N4CWII
Mainboard Vestel 17MB110S
Panel: VES430UNDB-2D-N12
Productcode: 10119394
Does anyone know, where I can get it ?
Or is it possible, to extract it from a working mainboard ?
The Support Telefunken/Vestel GER couldn't help me.
The Vestel TR Support didn't answer my email.
History:
The main problem with my Telefunken D43F287N4CWII was,
it just goes out after a while, sometimes after a... -
Hi all,
I’m looking for a USB firmware file or EEPROM dump for a Hitachi 42HXT12U TV.
The mainboard is a Vestel 17MB95M, and the screen panel is VES420UNDL.
I recently replaced the mainboard with another 17MB95M, but it’s programmed for an LC420DUJ panel, and I’m getting no picture. I’d like to flash the correct firmware via USB or update the EEPROM if needed.
If anyone can provide:- A working USB firmware file (like upgrade_loader.pkg or mb95_m.bin)
- Or a compatible EEPROM dump
07-23-2025, 12:15 PM -
Chiedo aiuto per problema a TV Hitachi 32HE4500 che non si accende più,ho bisogno del firmware della scheda madre vestel 17MB211S codice pannello VES315UNVL-2D-N11 ?
spero che qualcuno può averlo per riprogrammare eprom. grazie
Post in English !!!
I ask for help with a problem with a Hitachi 32HE4500 TV that no longer turns on, do I need the firmware for the Vestel 17MB211S motherboard, panel code VES315UNVL-2D-N11? I hope someone can have it to reprogram eprom. Thank you
-
Hello, i need firmware for Vestel 17MB82S, panel VES315WNDA-2D-N11.... -
Hello, i have an old Toshiba 32W1333DN (sorry, misspelled the headline) TV that had the standby led green/red flashing and no lightup problem, i repaired it by measure the led output as suspect led problem, i measured the LED:s one by one and found one bad led, i replaced the the led-straps and the TV works.
Now i need to update the software because the new rc "RM-L890" does not work and i think maybe it could be an firmware issue?, i have struggled to find it without any success because all of the links where invalid, i contacted Toshiba but they do not support this model...
Comment