Qilive Q.43-371 HDMI no audio

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dicky96
    Sun Seeker
    • Mar 2017
    • 1825
    • Spain

    #1

    Qilive Q.43-371 HDMI no audio

    Hi guys
    This is a wierd one. I have a customer with one of these Qilive TVs

    He has a MAG TV box, it works but he gets no audio.

    That was a MAG250. He brought it to my workshop and on my TV it works fine.

    I gave him a MAG254 which also tests fine at the workshop, and gave him that along with the HDMI cable I used to test, but it makes no difference - he gets video but no audio.

    He tried all 3 HDMI sockets and it doesn't make a difference. He has an android box and a satellite receiver and they give sound on HDMI no problem.

    So I am at a loss to understand what is causing the problem. Any ideas?

    Rich
    Follow me on YouTube
    ------------------
    Learn Electronics Repair
    https://www.youtube.com/channel/UCFX...R8UZ2vg/videos
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #2
    Re: Qilive Q.43-371 HDMI no audio

    i wonder when he is say on hdmi 1 which his mag tv box is connected to, in the sound settings on his tv can he change anything? i know on my tv i can change hdmi to analogue/digital auto etc maybe his sounds settings on his tv he can alter something

    Comment

    • dicky96
      Sun Seeker
      • Mar 2017
      • 1825
      • Spain

      #3
      Re: Qilive Q.43-371 HDMI no audio

      Hmmm possibly. It's a really weird one this, I doubt anything is actually faulty, in fact both of the Mag boxes, hdmi cable and the TV all test to be OK. They just don't want to work together.
      Follow me on YouTube
      ------------------
      Learn Electronics Repair
      https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

      Comment

      • vinceroger69
        Badcaps Legend
        • Mar 2012
        • 6714
        • uk

        #4
        Re: Qilive Q.43-371 HDMI no audio

        Originally posted by vinceroger69
        i wonder when he is say on hdmi 1 which his mag tv box is connected to, in the sound settings on his tv can he change anything? i know on my tv i can change hdmi to analogue/digital auto etc maybe his sounds settings on his tv he can alter something
        just re read my post and could not edit it,i should of said
        i wonder when the tv is on lets say hdmi 1 (which his mag tv box is connected too), in the sound settings on his tv can he change anything? i know on my tv i can change hdmi sound to analogue/digital auto etc maybe in his sound settings on his tv he can alter something and get the sound working like you say must be the tv and box miss match somehow.

        Comment

        Related Topics

        Collapse

        • samson7point1@yahoo.com
          Help troubleshooting an audio problem with an RCA SGT-250 CED Player
          by samson7point1@yahoo.com
          The Problem: This player has a toggle switch to select between Stereo, Mono R, and Mono L. Regardless of the setting it outputs the sound to both the L&R audio jacks. In the Mono R position, the audio output level is normal (from both the L and R audio output jacks), in the Stereo position the audio output is about half the volume, and in Mono L, it's about 3/4 the volume. Something about putting it into Stereo mode is causing the volume to drop significantly and I can't figure it out.

          The player processes the audio signal using two different reference frequencies. The "R"...
          04-30-2024, 11:22 AM
        • aliougm
          Marantz SR4003 AVR HDMI board issue, seeking for help
          by aliougm
          I have problem with my AVR(Marantz SR4003) HDMI board issue. I connect to my TV but screen color distorted,see attached picture.

          Connection as below:
          Set-top box HDMI output >AVR 3 HDMI input/one HDMI output>HDTV HDMI port
          If I bypassed AVR then HDTV screen color be good.

          I take out HDMI board from AVR and check services manual the schematic shown the HDMI signals path:
          3 HDMI input port > SIL9185 chip(HDMI switch) > SIL9033 chip(HDMI receiver) > SIL9030 chip(HDMI transmitter) > HDMI output port

          I replaced all...
          04-30-2022, 12:21 PM
        • i_am_patch
          Roland KR-3500/4500 Digital Piano. Crackling audio sound on all keys -Fixed
          by i_am_patch
          Hi All. I had a Roland KR-3500 Digital Piano (similar to the KR-4500) that exhibited a Crackling audio sound on all keys. After reading somewhere about someone with a similar issue who had replaced all the Electrolytic caps I decided to also go down that route. (Spoiler : It worked !) After some basic troubleshooting I determined that it could be noise feeding thru from the Keyboard scanning since the Demo tunes played back undistorted and the Audio amp / speakers were fine ( Inserted an Audio signal into the rear Audio input). After extracting the main board from the shield, I replaced 7 Capacitors...
          04-30-2024, 08:20 PM
        • spleenharvester
          Toshiba 50UL2063DB randomly rebooting with HDMI-CEC and/or HDMI-ARC enabled
          by spleenharvester
          I have this TV hooked up to only an AppleTV 4K and a Creative soundbar. Originally HDMI-CEC and HDMI-ARC wouldn't work at all, I replaced all the HDMI cables with decent UGREEN cables meeting the latest standards, now it all works perfectly but once or twice a day the TV itself reboots while watching a program, the AppleTV keeps running. I haven't fully pinned down whether it is ARC or CEC causing it yet. All are running latest firmware.

          I assume it is just HDMI-CEC being buggy as usual on a shitty Vestel machine, but can anyone think of anything I can try before disabling it?
          03-12-2025, 03:42 PM
        • RossMoodley1967
          LG LCD TV HDMI PORT FAULTY
          by RossMoodley1967
          LG LCD TV picture comes on intermittenly using hdmi port.The sound is on permantly.The hdmi ports looks fine and soldered in securely.The 3.4v coming to the main board is not present(not sure if will affect the hdmi port or where that voltage goes.)The hdmi cable is fine because it works on another tv.The ceramic caps connected to the hdmi controller ic is reading 39 ohms.Could the hdmi controller ic be faulty(feels very warm to touch).The RCA jacks work normally .Thank you in advance for your assistance..
          02-28-2024, 08:38 AM
        • Loading...
        • No more items.
        Working...