Vizio M551d-A2 Serial Number LWJJOJDP No Picture No Sound No Backlights - Please help with me this one. On CN101 pins 1: 5v, 2: 5V, 3: 3V, 4: 3V, 5&6: GND, 7&8:NA, 9&10:GND, 11&12: 12v, 13: 0V, 14: 0V, 15: 3v. On CN102 pins 1 & 2: 24v. On CN202 pins 1,8,9,16: 39.4V. No voltage at F1 on the TCon board. I'm lost on this one, Thanks for any help.
Announcement
Collapse
No announcement yet.
Vizio M551d-A2 No Picture No Sound - I Don't Understand
Collapse
X
-
Re: Vizio M551d-A2 No Picture No Sound - I Don't Understand
You didn't label all the pins. Test connector from mainboard to powerboard on powerboard side with all boards hooked up, test with tv plugged in but off then hit power, report both conditions here, give pin number, pin description/name and condition both off and when you hit power on. So we can see all the voltages and what they are doing.
Comment
-
Re: Vizio M551d-A2 No Picture No Sound - I Don't Understand
Need pin number follow by pin name and follow by the readings.
Is Fuse F10 on main board good/Last edited by budm; 08-13-2019, 01:22 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment
-
Re: Vizio M551d-A2 No Picture No Sound - I Don't Understand
Thanks again everyone. Main's F10 is good.
CN101
1&2 5VSB:5V
3 AC OFF DET: 3V
4 PS-ON: 3V
5&6 GND
7&8 5V(NC):not used
9&10 GND
11&12 REG 12V: 12V
13 BL ON/OFF: 0V
14 NC
15 LAMP ERR: 3V
CN102
1&2 REG 24V: 24V
3&4 GND
CN202
1,8,9,16 +VLED:39.4
2-7,10-15 VLED
Comment
Comment