Bush 50/211f slow turning on

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Braderz
    Member
    • Sep 2018
    • 19
    • United Kingdom
    #1

    Bush 50/211f slow turning on

    I have picked up a Bush TV model 50/211f, turns on ok sometimes, other times it takes a while. I've had the power board out but all of the caps look ok. Caps are 'Chang' - a brand I've never heard of. The board is from 2011 so lasted over 8 years. Shall I grab a new board for £20/£25 off ebay, or can you see any bulging in these? Or, do you have any methods I could try to reveal the bad cap....

    I don't have a capacitance meter but do have a few different testers around, so if worst comes to worst i can take them out of circuit tomorrow and test that way?

    Thanks in advance for any advice here.

    https://ibb.co/F8LhDcF

    https://ibb.co/nPdjvr1

    https://ibb.co/q0bmh1b

    https://ibb.co/JqTy6RB

    https://ibb.co/X7vVcfh

    https://ibb.co/L5qXmRY

    https://ibb.co/VmryMZ2

    https://ibb.co/Cm6HXKp

    https://ibb.co/Kjcb51z

    https://ibb.co/J5pt97d

    https://ibb.co/80TKr5t
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Bush 50/211f slow turning on

      Heat from a hairdryer is sometimes a cheap way of testing your faulty cap theory. Warm areas up and see if it helps the turning on.
      A cheap component tester is less than £10 and that will definitely identify your faulty caps out of circuit.
      You can post your photos on this site using the advanced tab, so those security minded can see them.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Stephen
          A1990 MacBook Pro 15" Turning on, loads then boot loops, fan spin slow and then fast
          by Stephen
          Got a MacBook Pro 15" A1990 with a board issue, The board turns on, I did a DFU revive to see if it needed a firmware patch, that was successful, however the board just keeps boot looping and turning off and on very quickly. Obviously the DATA Is there, but it wont even launch into recovery, it will just die and turn back on with Apple logo, once it gets really hot it dies, if the laptop sits for the day and is cool, it will turn on then get hot within 1 min then die and turn itself on and repeat. Once it does that it turns itself on and off repeatedly in seconds. I put a thermal camera...
          10-04-2024, 02:50 PM
        • frannyjunk
          Hisense H8G not turning on, only slow blinking white LED
          by frannyjunk
          These Hisense H8G series (or Q8G if you are in Canada) tv appears to have a common failure of the main board. Many posts on Reddit without a solution. Mine is a 55" tv hence the 55H8G model (TV comes in 50, 55, 65 and 75". Corresponding models are 50H8G, 55H8G, 65H8G and 75H8G). Symptom is that the tv will not turn on, only a slow blinking white LED near the on button on the tv. Has anyone found a repair for the main board? I can buy a replacement main board, but would prefer to repair my main board. Thanks.
          05-17-2023, 10:31 AM
        • ioanban
          Bush DLED32287HDCNTDFVP led smart tv screen not turning on
          by ioanban
          Hi,
          I have a Bush DLED32287HDCNTDFVP (the one without a T Con board ) with a screen that won't turn on.
          I have checked the backing light (it's fine), the main board seems to receive power as well, i have even tried replacing the main board but without any success and checked all the connections .
          Does anyone have any idea what might be the problem ?

          Thank you,
          John
          05-30-2021, 12:37 AM
        • gjlpereira
          MacBook Pro A1708 - CPU extremely slow, locked @ 0.39ghz; fan full speed
          by gjlpereira
          Hi forum.

          I'm working on a macbook pro, model a1708, that is running extremely slow.

          Everything on it seams to work just fine, it just works extremely slow; painfully slow; especially running macos (windows and linux actually run OKish on it, slow, but usable).
          One other symptom of the problem with the machine is that the fan is always running at full speed.

          This machine has been worked on by someone else previously; they tried to repair it, but with no success. The motherboard does have sings of being worked on, but it all looks good/OK; like...
          09-06-2022, 07:45 PM
        • FlailingEngineer
          Help with Bush Tv (Vestel 17mb95m Mainboard)
          by FlailingEngineer
          Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

          Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
          05-31-2023, 06:52 AM
        • Loading...
        • No more items.
        Working...