VIZIO VW26L vertical lines

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • S.gilletly
    Member
    • Nov 2017
    • 28
    • United States

    #1

    VIZIO VW26L vertical lines

    Hello,
    Have a Vizio model vw26L and when turned on there the screen is nothing but vertical lines. From anyones experience what needs to be replaced to fix? Is it an easy replacement?

    Thanks
  • ivtec
    Badcaps Legend
    • Dec 2008
    • 1967
    • USA

    #2
    Re: VIZIO VW26L vertical lines

    Originally posted by S.gilletly
    Hello,
    Have a Vizio model vw26L and when turned on there the screen is nothing but vertical lines. From anyones experience what needs to be replaced to fix? Is it an easy replacement?

    Thanks
    Show a Pic, but normally bad panel bro,trash sorry

    Comment

    • S.gilletly
      Member
      • Nov 2017
      • 28
      • United States

      #3
      Re: VIZIO VW26L vertical lines

      Thanks. I thought so. I'm just going to trash it. I picked it anyway

      Comment

      Related Topics

      Collapse

      • Stanley1843
        Screen Display Vertical Multicolor Lines
        by Stanley1843
        Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesn’t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
        06-29-2024, 11:54 AM
      • brad2157
        Vizio E70-E3 Two white vertical lines
        by brad2157
        I picked up a Vizio E70-E3 for free that shows Vizio logo and then goes to a black screen. Original owner said he started having wifi issues and then he tried to reset the TV and that's when it wouldn't boot up any longer after his reset attempt. I picked up a replacement main board from eBay that matches the same model # board as the original from the TV.

        Original main board - Shows Vizio logo when TV powers on, then goes to black screen. Doesn't boot up. No screen issues with any lines on start up Vizio logo.

        Replacement main board - Boots up fine, but starting...
        12-13-2021, 05:11 PM
      • viking509
        vizio e65 e3 LED tv color vertical lines center tv only
        by viking509
        I recently replaced the led backlights with LB65041 LED Backlight Strips and after putting it back together the backlights work but there are only colored vertical lines only in the center of the tv. I can see the Netflix logo (jumbled) after a minute or less the screen went dark. When I turned it on again the lines were back. Then I replaced the t-con board but the same vertical lines in the picture. My question is what is my next step? Could it be a source tab bond issue? A buffer board issue? Could I have loosened a connection to the panel when replacing the backlights? Should I replace the...
        03-21-2023, 12:48 AM
      • howardc64
        Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
        by howardc64
        Failure Symptom



        No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

        Where is the short?

        Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



        Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
        05-27-2025, 02:56 PM
      • visionbluedemon
        Help. Sony kd-65x85dj vertical lines
        by visionbluedemon
        First. it has no picture at all. i solved it by covering the ckv lines using tape to to block the connections

        Second. now has picture but with vertical lines that follow the image. tcon board ic overheating

        tried blocking LC lines too, but same results




        is it lcd panel issue or tcon board issue?...
        07-25-2025, 04:56 AM
      • Loading...
      • No more items.
      Working...