Panasonic tx-p42st33e

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • saud52
    Member
    • Aug 2015
    • 24
    • Bosnia and Herzegowina
    #1

    Panasonic tx-p42st33e

    Dear colleagues, I need your help!
    On the repair I have plasma TV Panasonic with GPF14de chassis. In the TNPA5390 network several components were burnt, tags can not be read. I have a schema but an Panasonic schemes have no component tags but only Panasonic code numbers. I need tags of these components: FET Transistor: B1CERR000055, smd Transistor: B1CHND000004, and small glass diode : B0BA02400030.
    Does anyone know this? Can you help me?
    Thank you in advance!
    Saud
    Tags: None
    • Moreno83
      Badcaps Legend
      • Jun 2014
      • 2008
      • The Netherlands
      #2
      Re: Panasonic tx-p42st33e

      Panasonic R6015ANX B1CERR000055 Transiostor TO-220

      Cant find the rest , need pictures of the board.
      I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

        Comment

        • saud52
          Member
          • Aug 2015
          • 24
          • Bosnia and Herzegowina
          #3
          Re: Panasonic tx-p42st33e

          Originally posted by saud52
          Dear colleagues, I need your help!
          On the repair I have plasma TV Panasonic with GPF14de chassis. In the TNPA5390 network several components were burnt, tags can not be read. I have a schema but an Panasonic schemes have no component tags but only Panasonic code numbers. I need tags of these components: FET Transistor: B1CERR000055, smd Transistor: B1CHND000004, and small glass diode : B0BA02400030.
          Does anyone know this? Can you help me?
          Thank you in advance!
          Saud
          Thank you for the answer, here I am sending you a schematic diagram
          Attached Files

            Comment

            • Moreno83
              Badcaps Legend
              • Jun 2014
              • 2008
              • The Netherlands
              #4
              Re: Panasonic tx-p42st33e

              Need a picture of the burned board/area. I got a few of these powersupply's so i can look what the partnumbers are. The B1CE etc is for panasonic...
              I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

                Comment

                • saud52
                  Member
                  • Aug 2015
                  • 24
                  • Bosnia and Herzegowina
                  #5
                  Re: Panasonic tx-p42st33e

                  Thanks! I need tags of these components: small glass diode D300/D301= B0AACK000004

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Andre Gilbert
                      Panasonic TC-P55ST50 8 blinks then no blinks
                      by Andre Gilbert
                      Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing hereπŸ€”?
                      Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting πŸ˜‚.

                      TV Model: Panasonic TC-P55ST50
                      ...
                      1 Photo
                      11-20-2024, 08:52 PM
                    • Dannyx
                      Panasonic SU-HTB18 dead power supply (unidentified transistor)
                      by Dannyx
                      Good day folks. I had a look at this soundbar from Panasonic today and it seemed like an easy enough fix, but then I got stuck.

                      Have a look at that fried primary. I reckon the transistor popped and took out the current sense resistors with it before the fuse could open to cut the power. I thought I'd have a hard time figuring out what values those are, as it usually happens when SMD resistors go up in smoke, but thankfully I was able to clean them enough to read 1r60 on there, which is 1.6ohms, so that was sorted - we need 8 of those.

                      On to the transistor: it's one...
                      01-23-2021, 10:33 AM
                    • AquaMan Ua
                      Problem with PANASONIC CF53 laptop after changing BIOS settings
                      by AquaMan Ua
                      Hello. I am asking you for a hint on how to solve the problem with my touchbook Panasonic CF53-2 standart model. After setting up the BIOS, the laptop displays the wrong image until Windows loads. (More precisely, it displays, but distorted, instead of the Panasonic image immediately after turning it on, it displays what is in photo #1 in the attached file) Then the image appears when Windows starts loading and then there are no problems with the screen until the reboot. If you enter the BIOS, just a black screen. If you connect an external screen, the image on it is the same as on the built-in...
                      2
                      2 Photos
                      05-17-2025, 09:40 AM
                    • magneh
                      Behringer Eurolive B205D repair - help identifying transistor
                      by magneh
                      Hello
                      Got this speaker from a friend , defective. Power led comes on and off , in a loop.
                      Disassembled, got the board out, and after a bit of measuring I found a low resistance on a 5v6 line. With a bit of current I found a transistor heating up on that line (labeled T1 and 113 as on pic).
                      After removing this guy, I got a value of 0.7 in diode mode on that 5v6 line, which before had 0.02 or something like that.

                      I tested powering it up without the IC, and the speaker turns on and stays on, and works fine

                      Still, I need to replace this transistor....
                      06-18-2025, 02:34 AM
                    • elsomer
                      help to identify transistor msi ms-15ck1
                      by elsomer
                      hi people, i need some help to identify a transistor(q14) that is missing on the board, so the gpu has no voltage i think that q14 activate the phases for gpu, but i dont have schematic or boardview, but i think its the same transistor than q15 and q16, thanks...
                      1 Photo
                      02-17-2025, 05:30 PM
                    • Loading...
                    • No more items.
                    Working...