Sony Smart Tv - Error 2200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • megaraider
    Badcaps Veteran
    • Jul 2015
    • 307
    • Portugal
    #1

    Sony Smart Tv - Error 2200

    I'm unable to anything else than browse the internet with Sony Smart Tv.
    Everything else fails giving Error 2200,
    e.g.: “TrackID”, RSS Widget, “Video / Audio Search”, …
    Tested with 2 sets, KDL-46HX920 and KDL-40EX721 (could not get my hands on other models).
    Tried everything listed https://www.sony.com.my/electronics/...icles/00013757.
    Anyone else with this problem?
    Tags: None
    • Andrew F. Ali
      Badcaps Legend
      • Jan 2014
      • 2450
      • Trinidad & Tobago
      #2
      Re: Sony Smart Tv - Error 2200

      Seems to be some sort of software update issue. Did you try a factory reset??

        Comment

        • megaraider
          Badcaps Veteran
          • Jul 2015
          • 307
          • Portugal
          #3
          Re: Sony Smart Tv - Error 2200

          Originally posted by Andrew F. Ali
          Seems to be some sort of software update issue. Did you try a factory reset??
          You're right, but had to do a factory reset followed by firmware update to the latest available version (again) and then another factory reset.
          Now they're working.
          Thanks.

            Comment

            • Andrew F. Ali
              Badcaps Legend
              • Jan 2014
              • 2450
              • Trinidad & Tobago
              #4
              Re: Sony Smart Tv - Error 2200

              Great!!...Thanks for the feedback.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • AK_777
                  Sony KD-65A1 Repair – 4 Red Blinks Error
                  by AK_777
                  Hi everyone!
                  I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

                  Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
                  02-20-2025, 04:15 PM
                • Sus256
                  HISENSE 65E7KQ PRO - no boot
                  by Sus256
                  Hi all!

                  HISENSE 65E7KQ PRO
                  RSAG7.820.13512 - chassis
                  MT9618BAATAB - cpu
                  RSAG7.820.12059 - power
                  HD650Y3U77 - panel
                  KLM8G1GETF - emmc

                  The TV does not turn on, the standby indicator is on. All voltages are present.
                  Emms is dead. Not readable, not detected.
                  Replaced emmc.
                  But with another dump there is no launch

                  Terminal log

                  UART
                  <
                  AC_ON
                  RPMB key is not yet programmed

                  HASH1_VERSION=0x00000000 64bit
                  E-B
                  FDE enabled
                  layout pattern onebin by SAR7,0...
                  06-01-2025, 02:11 AM
                • GoodCapDude
                  Sony XBR-75X940E intermittent 6 blinks error code
                  by GoodCapDude
                  Hi everyone. First post on Badcaps!

                  I am trying to fix a Sony 940E from 2017 that either starts normally (and works perfectly until turned off) or goes straight to the 6 blinks error code without showing anything on the screen. It is frustrating to know that it can still work perfectly but is barely usable because of the difficulty starting it up. I am willing to try to short the BL_ERR but I would like to avoid that if possible. Does anyone have a view on this? Thanks a lot....
                  09-20-2025, 06:07 AM
                • sushilachuthan
                  APC UPS error P13
                  by sushilachuthan
                  one of our new (only 4 year old) 1KVA APC UPS stop working and through error P13 contact customer support.
                  the equipment is out of warranty , upon investigation, we found the inverter board has the fault on the output hybrid relay circuit.
                  The inverter output relay is parallel by SCR/Triac to enhance the relay performance or other means.
                  We replaced the SCR with new device,, but the device is not power on as expected.

                  Further research on the issue found that, the error P13 (event ID 107) is latched on the UPS nvram/MCU and need to clear/reset using a service procedure....
                  09-26-2025, 09:00 AM
                • hakuuart
                  Error E4 of HP Smart Tank 750 printer
                  by hakuuart
                  Hello everyone, I need some help or advice regarding the HP Smart Tank 750 device. I have already checked for paper jams and anything stuck inside, as well as all the flex cables, but I still encounter an E4 error. We have taken it to customer service for inspection, but they don't know how to fix it. Is it possible that the issue lies with the main board or the sensor? I would really appreciate any guidance from those who have experienced this problem. Thank you!...
                  05-12-2025, 08:51 AM
                • Loading...
                • No more items.
                Working...