lcd/led screen panel repairing guide

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • capwizard
    Badcaps Legend
    • Jun 2016
    • 1991
    • USA
    #21
    Re: lcd/led screen panel repairing guide

    I think he needs to pay badcaps website for advertisement.

    and you can download all his ebook over here for free. For benevolence and morality i can't give the link but you can Google it.

    That's why my best friend Diah said ..........SPAM advertising post
    Attached Files
    Last edited by capwizard; 01-17-2019, 02:57 PM.

      Comment

      • khaled1981
        New Member
        • Oct 2019
        • 6
        • algeria
        #22
        Re: lcd/led screen panel repairing guide

        Thanks brother

          Comment

          • khaled1981
            New Member
            • Oct 2019
            • 6
            • algeria
            #23
            Re: lcd/led screen panel repairing guide

            Originally posted by malik4
            lcd/led screen panel repairing guide


            lcd/led screen panel t-con troubleshooting guides
            hello brother pdf is protected to copy why?????

              Comment

              • zozoo
                New Member
                • May 2013
                • 1
                • Hungary
                #24
                Re: lcd/led screen panel repairing guide

                Thanks!

                  Comment

                  • brunortt
                    New Member
                    • Dec 2020
                    • 5
                    • España
                    #25
                    Re: lcd/led screen panel repairing guide

                    Gracias

                      Comment

                      Previous 1 2 template Next

                      Related Topics

                      Collapse
                      • Ryan.man
                        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                        by Ryan.man
                        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                        02-04-2025, 12:23 PM
                      • smic717394
                        iphone XS turns off when press on screen.
                        by smic717394
                        Hi,

                        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                        07-25-2024, 10:16 AM
                      • howardc64
                        A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                        by howardc64
                        Problem

                        This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                        08-04-2024, 10:36 PM
                      • Chrissygizmo
                        Samsung UE55JU6800K half screen dark
                        by Chrissygizmo
                        Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
                        I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
                        02-10-2025, 12:33 AM
                      • CroBUTKO91
                        can you damage screen panel with high voltage
                        by CroBUTKO91
                        hi i have philips led tv i had vertical lines all over the screen so i was testing voltages on board connected directly to screen below t-con
                        i accidently shorted two caps just above flat cables going to screen 20v and 2v and the 2/3 of the left side of the screen has gone white but vertical lines are still there i still have all the voltages on caps nothing is shorted so im just wondering is it posible i damaged the screen (burned pixels) when i shorted caps ot its posible the t-con board got damaged, thank you
                        07-25-2022, 06:31 AM
                      • Loading...
                      • No more items.
                      Working...