I have a Samsung ps50c680g5kxxu which i got dirt cheap due to it clicking and not turning on, I opened the TV up, no components are blown and all the caps look fine. Sometimes it will turn on, not sure if its just a coincidence but its always seemed to come on after i hit the power supply board gently before plugging it in, once on it will stay on and can be power cycled without failure.
What could be the cause of the clicking and not powering up? can provide pictures of the boards if needed
Another thing to note is that when i was messing with the various pots on the boards to try and fix the red sparkling pixels that appear on the colour green, i noticed that the tv would turn off and click if it started up and displayed a white backgound.
Not sure what it could be caused by, but i am assuming the buffer boards, t-con and panel etc are all ok otherwise it wouldnt work fine once it comes on?
Any help on this would be appreciated
What could be the cause of the clicking and not powering up? can provide pictures of the boards if needed
Another thing to note is that when i was messing with the various pots on the boards to try and fix the red sparkling pixels that appear on the colour green, i noticed that the tv would turn off and click if it started up and displayed a white backgound.
Not sure what it could be caused by, but i am assuming the buffer boards, t-con and panel etc are all ok otherwise it wouldnt work fine once it comes on?
Any help on this would be appreciated
Comment