Saving 60" 70" + Display Panels From Cracks...

[Michale32086]

Re: Saving 60" 70" + Display Panels From Cracks...

Unfortunately, that almost requires 2 persons for the larger panels 60"+

The biggest issue I had before was stretching my arms wide enough to delicately lift a panel that is 55" wide or more..

[dick_barton]

Re: Saving 60" 70" + Display Panels From Cracks...

A two person job was what I had in mind once you get to these larger sets.
Perhaps the better solution when single handed may be the tilt method but although I could see the panel being removed from the frame I'm unsure how easy it would be to place it back into the frame.

Even with the suction cups you would have to be very careful that you lifted the panel without stressing should you lift one end slightly higher than the other, although you could use a piece of timber or such like to span between the two suction cups and lift on that.