Panasonic TX-L32U3B will not power up

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12196
    • U.S.
    #21
    Re: Panasonic TX-L32U3B will not power up

    Very cool, after this I think I'm going to start with factory resets first thing I do if possible, Very nice solve

      Comment

      • Chuper
        Member
        • Sep 2017
        • 36
        • Canada
        #22
        Re: Panasonic TX-L32U3B will not power up

        Well, I can't wait till I get home now! Having a Panasonic TC-L32X2 with missing INV_ON and 12V present - page 52 of the attached training guide tells you that A board is to blame!
        Attached Files

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            ORIGINAL POWER SUPPLY BOARD
            7 Photos
            11-22-2024, 01:46 PM
          • PantherDave
            Microsoft Surface Pro (5th gen) model 1796 - no power
            by PantherDave
            Hi all!

            I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

            I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
            https://www.badcaps.net/forum/troubl...-hardware-devi...
            05-29-2024, 02:01 PM
          • GLISIT
            Asus Probook P5440UF-XB74 power issue
            by GLISIT
            Hi all,

            TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


            I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

            A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
            01-16-2025, 02:29 PM
          • sam_sam_sam
            Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
            by sam_sam_sam
            I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

            One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
            03-31-2024, 02:12 PM
          • oldschoolgamer
            Panasonic TX-50EX700B Won't Power On
            by oldschoolgamer
            Hi. I have a Panasonic TX-50EX700B which hadn't been used very often for some time. Recently it started getting used a little more often, until one day it just refused to power on with the red LED blinking 13 times. Upon researching, it turned out it apparently had something to do with the 5v power line, so I assumed it was probably the power supply.

            I purchased a power supply for the TV from a seller that claims that it works fine and was just taken from a TV with a broken screen. After fitting the new power supply and trying the TV, I was greeted with the power LED being red for...
            10-26-2022, 04:15 PM
          • Loading...
          • No more items.
          Working...