Re: Samsung UN55D6003SFXZA
This area here
This area here
Attached Files
-
Did I leave the soldering iron on? -
Re: Samsung UN55D6003SFXZA
So this is a picture of my main board.Attached FilesComment
-
-
Re: Samsung UN55D6003SFXZA
IC1301 IC1302. Apply heat there.Did I leave the soldering iron on?Comment
-
Re: Samsung UN55D6003SFXZA
So with no luck on this course of action, i am guessing that the next thing to do would be replace the board? I have seen other posts about putting in a different main board and then changing settings in the service menu. If i can't find the same board how do i go about finding a compatible main board that i can install?Last edited by PeteTait; 01-30-2018, 01:56 PM.Comment
-
Re: Samsung UN55D6003SFXZA
I have a main board problem too. Not the same, but I'm thinking of trying the heat method. How much do you heat it?Comment
-
Re: Samsung UN55D6003SFXZA
Not sure if the 50" version or the 46" version is compatible with this TV if so you may have to make some adjustments in the service menu after install.
Mist likely an eeprom could be had on shopjimmy? If not then it could be an NVRAM brick and therefore a replacement board is in order.Did I leave the soldering iron on?Comment
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hi everyone,
Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.
Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.
I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue.... -
Hoping someone here could possibly help. I have a few questions in regards to compatibility with main boards. But I'll give a quick short run down on what's going on first;
I have Samsung Smart TV UA65MU6100WXXY version DA01
Now years ago it started intermittently playing up after a lighting strike. Lighting hit the block of units i was living in at the time. Ever since that night the TV started having a mind of its own, It would randomly turn itself off or on, and all inputs stopped responding like HDMI, aerial, but USB still worked. Anyway, over the next few months... -
Hi, I did look everywhere to know if Samsung Y Main boards LJ92-01732A without rev marking is compatible with LJ92-01732A rev AA2.
If they are not compatible why did Samsung give them the same part number to begin with?08-04-2025, 11:35 PM -
Hello!
I just got a Samsung TV model HG75EJ690UB 75" and 4K
. It is a hotel TV, with a slightly different version of the Tizen operating system than the TVs at home.
Being a hotel, it is covered in many functions. With the service menu I can unlock some, but not others. For example, I can't install apps like Netflix etc...
The fact is that it seems that I can replace the main by a, say, "normal". I think the one that corresponds is NU7105, ref BN94-02635. At work, which is a convention center and a hotel, I have many TVs from 55" to 85" that...
Comment