Re: Sharp lc-49cfg6001k fault diagnosis
Hi mate can you share again please i got the same problem
Hi mate can you share again please i got the same problem
-
-
Re: Sharp lc-49cfg6001k fault diagnosis
hi mate for some reason i cannot upload the file if you can inbox me your email i will send this to you many thanksComment
-
Hi Stejones
Can you share the Firmware again please i got the same problem
Or inbox me “ stelestan01@gmail.com “....many thanksComment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Hi. Does anyone still have a link to the firmware update please?
Its halfterm, the kids are off, and without a working TV tmrw is going to be a nightmare!!!
Help please!!!!Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Why don't you email Sharp. If they were good enough to send it to one person then I don't see why they would not send it to you.Willing to help but I'm no expert.Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
I have done that as well, and tried ringing them, but their lines had just closed. I'm just trying to get it sorted asap!Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Can you message them on their Contact Us page
https://www.sharpconsumer.eu/contacts/Willing to help but I'm no expert.Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Tell them your tv is only one month out of warranty and all you want is the lousy firmware, so Sharp can you please email me the firmware and by the way, WHY isn't it on your website?Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
They emailed us the software.... but it didn't work for us. Just trying to figure out if it's worth taking it to get it fixed or just buying a new one.
Thanks for the replies.Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Is it possible for you put the firmware on a Dropbox or Gdrive for others who are looking for this firmware to download. I'm sure they would appreciate it.Willing to help but I'm no expert.Comment
-
Could you please email me the firmware I am having the same problem. ThanksComment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Hi all sorry for the late reply i will try to upload the file again ty please email me if this doe's not upload tyComment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Hi i think i have emailed the firmware to your email mate Ash90Last edited by stejones; 06-03-2018, 03:06 PM.Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
tat2loo, what are your symptoms?Comment
-
Re: Sharp lc-49cfg6001k fault diagnosis
Your submission could not be processed because a security token was missing.
If this occurred unexpectedly, please inform the administrator and describe the action you performed before you received this error.
this is what happens when i try to upload the file guys now waiting on reply from administratorLast edited by stejones; 06-03-2018, 03:33 PM.Comment
-
If this is still going guys I'd love a copy of the firmware I have 2 x these TVs both having the same fault. You would of thought sharps would have this on there website considering it's such a common fault.!!
Any help getting the firmware would be greatly appreciated. ThanksComment
-
This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.
I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match... -
Hello everyone. 😀
As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.
Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
There are no devices that have exploded or otherwise show signs... -
Good day all,
I got a 2007 MacBook from a friend. The fan was not working so it was overheating.
Once the fan was swapped, I installed an OS and it worked fine.
The board had quite a few corroded spots so I removed it, touched those spots with a soldering iron, washed the board in PCB cleaning fluid (I've done that many times), rinsed it with distilled water, dried it etc.
Unfortunately it doesn't work anymore. It does turn on, fan spins, power LED turns on. But no picture.
If I see that right, I have missed VCORE on L7100 (page 59).... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
Comment