SONY KE-42TS2E-turn ON, then OFF immediately

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • catalin004
    Member
    • Jan 2015
    • 35
    • Romania

    #1

    SONY KE-42TS2E-turn ON, then OFF immediately

    Hello everybody and Merry Christmas!!! I have an problem with SONY- plasma tv, when I plugged in tv start an stop after 2 seconds, and red led flash for 2 times...if I repet the procedure make same thing...I have schematic, I check the smps and the voltage are ok.
    I'm soory for my bad English and I need some ideeas...thank's
  • dskall
    Badcaps Legend
    • Oct 2016
    • 2905
    • usa

    #2
    Re: SONY KE-42TS2E-turn ON, then OFF immediately

    Can you upload schematic? Maybe some pictures
    I assume no responsibility for any stupid suggestions I might post.

    Comment

    • catalin004
      Member
      • Jan 2015
      • 35
      • Romania

      #3
      Re: SONY KE-42TS2E-turn ON, then OFF immediately

      Schematic it's here



      Pictures I can't make, because it's stop very fastly, after 1-2 secconds

      Comment

      • catalin004
        Member
        • Jan 2015
        • 35
        • Romania

        #4
        Re: SONY KE-42TS2E-turn ON, then OFF immediately

        Pls a schematic for PS?code

        1-468-720-12

        APS-192

        Thank you

        Comment

        • freakaftr8
          Badcaps Legend
          • Oct 2012
          • 3743
          • USA

          #5
          Re: SONY KE-42TS2E-turn ON, then OFF immediately

          I remember this fault a long time ago on a Sony plasma 42 inch. If I'm not mistaken I believe all circuit boards and panel are produced by fujitsu or Something to that nature however the problem was a feedback circuit on the Y sustain board that was causing the problem. Never did get to finding out what the problem was but I replaced the Y board. Problem solved.
          Last edited by freakaftr8; 12-29-2017, 10:35 AM.
          Did I leave the soldering iron on?

          Comment

          • catalin004
            Member
            • Jan 2015
            • 35
            • Romania

            #6
            Re: SONY KE-42TS2E-turn ON, then OFF immediately

            Today I check Va and Vs voltages, and I found them with 2 Volts more then usually.
            Va = 63,3 (noted on label panel) I found it 65,1V
            Vs = 80.2 (on the label), I found it 82,5 V, measured with oscilloscope.
            I putted them at correct voltage, from the label panel note and TV seems to run ok....
            I don't know why, but I think that the problem may be some bad resistors .
            When the TV was in run mode, I grow up Vs, at 82 V and TV stop immediately...that says that the protection are working at upervoltages ...And I think that is no problem on Ysus or Xsus modules.

            Comment

            • freakaftr8
              Badcaps Legend
              • Oct 2012
              • 3743
              • USA

              #7
              Re: SONY KE-42TS2E-turn ON, then OFF immediately

              What's voltage at primary capacitors in power supply when runnung,
              Did I leave the soldering iron on?

              Comment

              • catalin004
                Member
                • Jan 2015
                • 35
                • Romania

                #8
                Re: SONY KE-42TS2E-turn ON, then OFF immediately

                372V , at black screen appear on display some little stars red and green....on all display.repeat just were is black screen, or something black on image...the tv work with RF antenna

                Comment

                • freakaftr8
                  Badcaps Legend
                  • Oct 2012
                  • 3743
                  • USA

                  #9
                  Re: SONY KE-42TS2E-turn ON, then OFF immediately

                  Could be aging panel. 372v sounds too low. Power supply overworking possibly. Check feedback resistors on power supply or possibly aging capacitor on primary.
                  Last edited by freakaftr8; 12-30-2017, 12:24 AM.
                  Did I leave the soldering iron on?

                  Comment

                  • catalin004
                    Member
                    • Jan 2015
                    • 35
                    • Romania

                    #10
                    Re: SONY KE-42TS2E-turn ON, then OFF immediately

                    Do you have a schematic diagram for this SMPS?

                    Comment

                    Related Topics

                    Collapse

                    • Carlos#2003%
                      Schematic de una Sony VAIO PCG-41217u, Sony VPCSB45FL (MBX-237), 1p-0117j01-a012 mbx-237.
                      by Carlos#2003%
                      Buenas mi nombre es carlos me uni al foro porque estoy buscando el schematic de una sony vaio pcg-41217u otras formas de escribirlo son 1p-0117j01-a012 mbx-237 numero de placa revision 1.2 o Sony VPCSB (MBX-237), en fin me gustaria y ayudaria un monton si alguien me puede dar dichi svhematic para hacer las mediciones de una laptop de la mencionada anteriormente(Sony VAIO PCG-41217U) con el fin de repararla dejo de funcionar solo prende el led de la bateria al pulsar el boton de power el disco empiesa a hacer ruido de actividad pero los leds del frontas no reflejan acividad y no enciende la pantalla....
                      02-15-2024, 07:52 PM
                    • x_orange90_x
                      Seven Leagues Slot Machine stop button issues
                      by x_orange90_x
                      I don't know if anyone here has experience with Japanese slot (pachislo) machines, but I sure hope so. I bought this machine last week in semi-working order. It would play and the reels would spin, but the stop buttons would not stop them at all. I found that the high-frequency filtering tantalum capacitor was bad on the reel stop board, along with the fuse being blown. I replaced the fuse and removed the capacitor. I haven't replaced the cap yet because I didn't have one on hand, but it's not necessary for the operation of the machine.

                      The issue now is the Stop buttons are intermittently...
                      02-12-2025, 10:01 AM
                    • Califauna
                      Connecting charger cable causes Sony WH-10000MX2 bluetooth headphones to stop working
                      by Califauna
                      Hi,

                      I have a pair of WH-10000MX2 bluetooth headphones with a strange problem. Connecting the charging cable causes the headphones to no longer turn on when pressing the power button.

                      I thought I had 'fixed' this when I took them apart and disconnected the battery for 15 minutes and found as soon as you disconnect the battery they can be powered on and off as normal using the power button. But then the moment you connect a charging or data cable to a charger or laptop USB port, the power button stops working and the can't be turned on again. No response.

                      The...
                      02-28-2024, 06:14 AM
                    • dkneyle
                      Sony KDL-46HX850 Can't upgrade/update firmware
                      by dkneyle
                      Diagnosed this TV as having a failed main board which I've replaced with one from a KDL 55HX850. They are (supposedly) the same board.

                      Being 'Smart TV' it requires a firmware reboot when you swap out boards such as T-Con or main board. It starts with a black screen and flashing yellow and green LEDS, indicating it needs that firmware boot. The procedure described all over the web is to put the software into the root directory of a FAT32 formatted USB drive and it should load that up once plugged into USB1 port. But not for me. I can see the LED on the USB chip flash for about...
                      09-25-2024, 10:44 PM
                    • Document Archive
                      Sony VAIO SVF11N1L2E Hybrid (2-in-1) Fit multi-flip Specification for Upgrade or Repair
                      by Document Archive
                      This specification for the Sony VAIO SVF11N1L2E Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the SVF11N1L2E boardview and SVF11N1L2E schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                      09-06-2024, 05:27 AM
                    • Loading...
                    • No more items.
                    Working...