Sorry if I'm not in the right section of the forms. I recently acquired a proscan 42" TV that no longer lit up.
Tore it apart to find several components on the inverter board burned up. A resistor and several jumpers.
Planing to replace them along with the sem chip and FETs.
Was hoping someone might happen to have a schematic for this board? Been searching high and low, to no avail.
I know I can get a different board that will work in its place, but I'd rather rebuild this board and see how it goes first.
Thanks for any help!
Tore it apart to find several components on the inverter board burned up. A resistor and several jumpers.
Planing to replace them along with the sem chip and FETs.
Was hoping someone might happen to have a schematic for this board? Been searching high and low, to no avail.
I know I can get a different board that will work in its place, but I'd rather rebuild this board and see how it goes first.
Thanks for any help!