Have a Hisense 50H5G no backlight. Can see a picture with a flashlight.
I have 2v on the red wire and 0 volt on the white wire going to the LEDs.
PWM2 is 3.2v and SW is 2.8. IS SW BL_ON and is that voltage high enough?
From the top down
19v (16v)
19v (16v)
0v (GRD)
3.7v (STBY?)
12v (12v)
12v (12V
2.8v SW
3.2v PWM2
0v (GRD)
0v GRD)
Main filter caps on PS is 380v
I have 2v on the red wire and 0 volt on the white wire going to the LEDs.
PWM2 is 3.2v and SW is 2.8. IS SW BL_ON and is that voltage high enough?
From the top down
19v (16v)
19v (16v)
0v (GRD)
3.7v (STBY?)
12v (12v)
12v (12V
2.8v SW
3.2v PWM2
0v (GRD)
0v GRD)
Main filter caps on PS is 380v
Comment