Purchased a Vizio M552i-b2 tv that wouldn't power on. Took the back cover off, and inspected everything. Didn't see any popped caps, or anything like that. Figured it was an issue with the power supply board, so I went ahead and ordered one. Installed it, but that didn't fix the issue.
After the power board didn't fix the issue, I went ahead and replaced the main board. Lo and behold, the tv powered on. However the screen was red. Also, the menu with the inputs is jumbled.
power up screen looks normal
Disregard that light, that's a reflection of the power indicator.
netflix menu screen looks a little dark, but normal
playing something from netflix however, does not
netflix menu with jumbled input
tried an HDMI input, with the same issue
I didn't get a good picture of the screen when it's red, but if I turn it on, but don't select any inputs, the screen is red. The "no signal" part is pretty dark too.
Anyone have any ideas on what the problem may be? Possibly a bad main board? Maybe a problem with a ribbon cable? I can't figure it out, and I'd rather not just keep throwing money at it. Any and all help is greatly appreciated. Thanks!
After the power board didn't fix the issue, I went ahead and replaced the main board. Lo and behold, the tv powered on. However the screen was red. Also, the menu with the inputs is jumbled.
power up screen looks normal

netflix menu screen looks a little dark, but normal

playing something from netflix however, does not

netflix menu with jumbled input

tried an HDMI input, with the same issue

I didn't get a good picture of the screen when it's red, but if I turn it on, but don't select any inputs, the screen is red. The "no signal" part is pretty dark too.
Anyone have any ideas on what the problem may be? Possibly a bad main board? Maybe a problem with a ribbon cable? I can't figure it out, and I'd rather not just keep throwing money at it. Any and all help is greatly appreciated. Thanks!
Comment