Sanyo FW42D25T

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    Lync Windows Store app Lync 2013. Text telephone (TTY) mode is used to send text over a telephone line. A TTY device must be connected to the computer to interpret the modified audio otherwise you might experience poor audio quality. Using TTY mode in a conference call may also cause audio quality issues.

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    Tty

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    I don't ever deal with rar files, can't open it, 7-zip is over my head. and

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    Try
    Attached Files

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    You must first unzip the zip, and then write down this file with the “bin” extension.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    I guess I should have asked if As programmer can deal with the rar file or do I have to open the file first then add it?

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    I used As programmer.

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    I don't know what program you use for ch341a.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    I'm like a chimp trying to do calculus lol, how do I put that file you posted in As programmer?

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    Yes.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    You lost me, you mean I should erase it and try the one you posted above?

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    The software in the firmware is live, try it with a clean NVM.
    Attached Files

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    .
    Attached Files
    Last edited by nomoresonys; 10-24-2023, 08:39 AM.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    Ok, off to YT programmer school to try to learn some new tricks.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    Tested voltages on eeprom 25q32bsig, not sure if it will tell anything or not, tested on bench not grounded, 1-0, 2-3.17v, 3-3.25v, 4-0, 5-0, 6-0, 7-3.28v, 8-3.28v Data sheet: https://www.datasheetcafe.com/25q32bsig-datasheet-pdf/

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    I left out a few folks who deserve mentioning but they know who they are.
    Last edited by nomoresonys; 10-20-2023, 06:43 AM.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    Just want to say THANKS, you CapLeaker and Diah are outstanding people who have helped so many, I hope good Karma comes back to you all many times fold.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    I wish I could Lotus but I'm not smart enough to figure out how it works, I REALLY suffer in this area and most other areas lol. Don't have a programmer, was thinking about grabbing eeprom from m-tronicz, less than 10 dollars, didn't want to invest anything in this seemingly sub-standard tv but I'm just determined to figure out the problem, THANKS for the offer.

    Leave a comment:


  • lotas
    replied
    Re: Sanyo FW42D25T

    Yes, that might be the case, post your dump here and I'll take a look.

    Leave a comment:


  • nomoresonys
    replied
    Re: Sanyo FW42D25T

    Would a bad eeprom UF1 make UL2 read dead/no voltage?

    Leave a comment:

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • HERETIK10
    MSI GT70 2PE Voltage dropping on the main power rail
    by HERETIK10
    Hi everyone,
    I have a strange problem (for me) on an MSI GT70 2PE laptop.
    When it's under heavy load, power goes steadily to the battery (for 2 or 3 seconds) then return to the charger. If I remove the battery it turns off.
    The higher the load, the lower the voltage on the main rail. We go from 19.5V, PC connected to the charger but turned off (normal consumption of 0.06A)
    On, when it draws 2A the voltage is 19.2V, then eventually collapses to 18.5V (and turns off) around 5A.
    I removed the first 2 mosfets (PQ13 & 14) from the main rail, without noticeable change....
    11-24-2023, 06:06 AM
  • Dani_2024
    Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
    by Dani_2024
    Hi and thanks in advance for any input you might provide!
    I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
    Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

    Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
    10-28-2024, 05:06 PM
  • Henke
    Philips 55POS9002/12 - No PS_ON voltage from main board
    by Henke
    I wondering if there are some usual faults regarding the PS_ON signal from main board to PSU board?
    Where do i start looking?

    I have standby light and the PSU is working if i connect 3.3V to the PS_ON pin on the psu board....
    08-11-2024, 08:34 AM
  • Fernon@Repair
    Gigabyte Z490 Gaming X Motherboard No VCORE Voltage
    by Fernon@Repair
    i have Gigabyte Z490 Gaming X Motherboard .it has a power on no display fault .. no vcore voltage and debug led stuck CPU LED .

    VCCIO voltage ok
    VCCSA Voltage OK
    VCCPLL Voltage OK
    Ram Voltage ok
    RamVTT OK
    VPP 2.5 OK

    But No Core Voltage

    and i want to this vrm ic datasheet or pinout (ISL69269)
    anyone have this ic pinout voltages?...
    06-25-2025, 07:19 AM
  • Loading...
  • No more items.
Working...