Vizio E321VT picture upside down

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Doc38343
    Badcaps Veteran
    • Apr 2015
    • 402
    • United States
    #1

    Vizio E321VT picture upside down

    Have no remote for this one but it has a very good picture, it is just upside down. I looked thru the menu and tried Factory reset but it is still upside down.
    anybody have experience with this model and problem.

    Vizio E321VT picture upside down

    Thanks
    Tags: None
    • Doc38343
      Badcaps Veteran
      • Apr 2015
      • 402
      • United States
      #2
      Re: Vizio E321VT picture upside down

      Never mind it is a bad mainboard. Discovered that it will not program channels. it also stops working until i unplug it and then it will work only on one channel.
      I will remove the back and do some pics and the normal routine.

        Comment

        • dskall
          Badcaps Legend
          • Oct 2016
          • 2905
          • usa
          #3
          Re: Vizio E321VT picture upside down

          So you just turned it on one day and picture was upside down?
          I assume no responsibility for any stupid suggestions I might post.

            Comment

            • ducky29
              Badcaps Veteran
              • Dec 2015
              • 370
              • Europe
              #4
              Re: Vizio E321VT picture upside down

              Try reprogramming the eeprom.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • gavric
                  Vizio M70-C3 Half picture is bad, main board on its last leg?
                  by gavric
                  Hello, i am working on Vizio M70-C3. It can hardly power on, it takes 15 power button presses or remote. Seems like eeprom problem that I seen before but all reading online says that this tv has power board or main board problem.

                  When tv powers on vizio V logo shows nice on whole screen. picture 1
                  When it goes into tv mode it only shows good picture on left side of screen, right is all scrabbled up. pic 2
                  When i start youtube picture shows on left side fine, right is all scrambled. pic 2
                  When i click video to start playing picture goes black(like when you change...
                  09-02-2021, 08:55 PM
                • ggil44
                  Vizio M65-E0 No Picture, No Sound
                  by ggil44
                  Hi I inherited a Vizio M65-E0 that isn't working. It must have been dropped on the corner because I found that the infrared circuit had a capacitor with one end broken off of the board and some green corrosion around the plug to the main board. I re-soldered the capacitor and cleaned the corrosion well and tried turning the M65-E0 on and I was successful. My problem is that while the back lights come on and appear to perform local dimming there is no picture or sound. It kind of looks like you are looking at the TV through a very dense fog, where changing the input on the remote will change bright...
                  09-03-2024, 08:30 PM
                • maricm
                  Vizio m65-c1 picture flashing on and off on the screen
                  by maricm
                  HI all,
                  hope someone point to the possible issue before I start buying replacement parts.
                  Tv starts normal and responds to remote fine, PSU voltages mesured fine 19v was 18.9V under load and 19V with main board disconnected.
                  Backlight stays on all the time,
                  Sound works fine.
                  screen keeps changing form black to full picture in about 1sec intervals.
                  Picture looks fine with no visible artifacts.
                  I have disconnected backlights and flashlight test confirmed that picture is still doing the same.


                  Disconnecting left and right ribbons on...
                  11-25-2023, 06:32 PM
                • garrymc123
                  Luxor TV board input board change but picture upside down
                  by garrymc123
                  Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..

                  Is there anything I can do to flip the picture or do I need to change the board again..

                  Thanks
                  Garry...
                  08-29-2022, 04:53 AM
                • Fly_Among_Stars
                  VIZIO E70-E3 Half picture with half TCON
                  by Fly_Among_Stars
                  Hi,
                  I have a VIZIO E70-E3.
                  Symptoms: Black screen, no picture, but LED backlights are working.
                  I probed the power board and voltages are as listed on the board.
                  Main board appears fine, too.
                  I believe the problem is either a bad T-CON board, or connection to LCD, or bad LCD.
                  There are two separate ribbon cables feeding the LCD.
                  If both are connected, the screen is black.

                  If only the ribbon cable that feeds the right side of the screen (when viewed from the front) is disconnected, the left side of the screen shows picture and...
                  04-24-2023, 08:20 PM
                • Loading...
                • No more items.
                Working...