LG 42LF561V panel defect

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • llonen
    Badcaps Veteran
    • Sep 2014
    • 495
    • hampshire
    #1

    LG 42LF561V panel defect

    I have just had this set come through, failure just outside warranty and I am told from the customer insurance wont cover it.

    It has a single line across the lower portion of the panel, I assume this is not going to be salvageable, the line does not seem to respond to touch or pressure either to the bezel or the stripped panel.
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Lee M.
      IR night vision goggles to find shorted panel line?
      by Lee M.
      Has anybody tried to use IR night vision goggles or other thermal imaging device to find a shorted line in a ribbon cable going from a panel driver board into the panel? I would think the shorted line would get hotter than the other lines and might just show up on a thermal imaging device. Just wondering if anyone has tried this and if so did it work?
      11-10-2023, 03:19 PM
    • Ancient1
      Interesting unusual Panel Defect ?
      by Ancient1
      Hi

      Pilot PD43S9HE Led TV . Panel model: See in photos

      Photos tell it all really. ( added Logo image photo )
      The bulge in the area before the panel Matrix .
      To me it looks like a local short that heated inside.

      Should I waste my time in flipping the panel , as if this issue can be repaired ?
      The distribution board at this end looks ok , though I did not measure anything

      What are your thoughts ?

      Cheers
      5 Photos
      12-10-2023, 11:30 AM
    • AK_777
      Sony KD-65A1 Repair – 4 Red Blinks Error
      by AK_777
      Hi everyone!
      I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

      Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
      02-20-2025, 04:15 PM
    • howardc64
      LG 49UJ6500 LCD panel lighter band that goes away
      by howardc64
      49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

      Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
      02-19-2023, 12:13 AM
    • triplefour
      SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
      by triplefour
      TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

      tcon is built into mainboard.
      Only one cable goes to panel boards.
      there is a cable from one panel board to the other that links them.
      cost cutting measure that results in us having harder time to diagnose.
      removing the link to the second panel board allows TV to stay on with stable backlight but no image.
      used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
      07-28-2022, 07:59 PM
    • Loading...
    • No more items.
    Working...