Hi there,
this is again a cheap Vestel tv with build in DVD. Problem is, that there is a 17ips19-5 power supply fitted in, and it switches off and on. Backlight is coming up also.
The former fault was that it could take a day to switch on, but then it worked.
Having read a Dutch forum, I replaced D318, D319 and D320 with new diodes (SB5100), but now the tv switchs off and on repeatedly.
Having read some postings here, I took the power supply apart and I could measure 12 volt (D318/D219/D320 at the kathode) and +24 volt (the remaining 3 diodes, allthough one of them is fitted in the lower right corner). They seem to stay (if I should measure longer please tell me).
During the first startup I saw the text "no signal at HDMI1/HDMI2" (in Dutch). So there is also data flowing if it works.
Any ideas?
P.S. I'm not a native English speaker, improvements about my spelling will be appreciated.
this is again a cheap Vestel tv with build in DVD. Problem is, that there is a 17ips19-5 power supply fitted in, and it switches off and on. Backlight is coming up also.
The former fault was that it could take a day to switch on, but then it worked.
Having read a Dutch forum, I replaced D318, D319 and D320 with new diodes (SB5100), but now the tv switchs off and on repeatedly.
Having read some postings here, I took the power supply apart and I could measure 12 volt (D318/D219/D320 at the kathode) and +24 volt (the remaining 3 diodes, allthough one of them is fitted in the lower right corner). They seem to stay (if I should measure longer please tell me).
During the first startup I saw the text "no signal at HDMI1/HDMI2" (in Dutch). So there is also data flowing if it works.
Any ideas?
P.S. I'm not a native English speaker, improvements about my spelling will be appreciated.
Comment