Fan Progect on philips 46pfl5505d/f7

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ivtec
    Badcaps Legend
    • Dec 2008
    • 1967
    • USA
    #1

    Fan Progect on philips 46pfl5505d/f7

    Hi guys: i have a philips 46pfl5505d/f7 and i'd like to add 2 cooling fans on the back 1 on the power supply and 1 on the Main board BGA but i have the tv on a tv stand and i don't feel like taking it out cause it's alot of work,i think i can do the holes without removing the tv,so i send here a pic attach. of the back of the tv,i would appreciate if someone has one of these series alike opened to draw on the pic attach a mark where i can make the holes,thanks guys.
    Attached Files
    Last edited by ivtec; 04-29-2017, 12:13 PM.
    Tags: None
    • ivtec
      Badcaps Legend
      • Dec 2008
      • 1967
      • USA
      #2
      Re: Fan Progect on philips 46pfl5505d/f7

      Hi there folks any help here?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo
          by G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

          It does power up when pressing the power button.

          I already try the power button while plugin the plug with no result.
          Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

          Could this be an PSU or eMMC issue ?
          07-19-2025, 03:43 AM
        • ivtec
          Philips 46PFL5505D/F7 thin green line?
          by ivtec
          Hi guys i have this Philips 46PFL5505D/F7 that has a thin green line in the corner almost unnoticeable ,this probably has been here for a long time,and it more noticeable when watching regular tv entertainment,since i mostly watch soccer on this tv because of the green field ,it's probably i never noticed it ,do you guys think this might be the ribon cables , tcon board or main board ?...
          12-24-2020, 12:57 PM
        • aidanmo
          Philips 43PUS7506/12 - Loud blown out sound
          by aidanmo
          Hello,

          I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
          I thought maybe the speakers got damaged, so I replaced them - no dice.
          • Using the internal speakers, it always happens.
          • Using the headphone jack, it never happens.
          • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
          ...
          02-28-2025, 03:13 PM
        • Cornito
          Philips 50PUH6400 bad color and gosting / slow motion on one side
          by Cornito
          Hello Team,

          New issue on LCD panel where I need to find out the cause and the potential solution.
          This is on the Philips 50PUH6400, the LCD panel is an INNOLUX V500dk2 xrs1.

          I have image, on the right side, the image is more or less normal even if there is a small blur on edge, on the left there is an issue.
          When moving up and down in the menu on the right the image is slow to disappear, and is darker, like red/brown.

          I've checked voltages, no issue found comparing right and left side of the panel driver.
          VHG VGL CKV... are the sames on...
          03-08-2024, 06:41 AM
        • spantor
          Activate power board Philips 40PFH40009/88 tv
          by spantor
          Hello partners.

          Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
          The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell...
          02-11-2024, 05:07 PM
        • Loading...
        • No more items.
        Working...