HI hope some one can ? I have a Pioneer Plasma pdp-50mxe1 , it wont turn on . What its doing is stby red led is on when I go to turn it on green led comes on and I hear relays clicking , then it flashes 2 red led blinks .
I have removed back cover and checked voltages . Stby voltage 3.3V is working and red led on power supply stays on . Have removed ysus and xsus board cables no difference . Have checked all supply rails to see if they come up for that brief second and they do . Is there a way to force power supply with a 1k resistor across stby and 3.3volt line ? Not sure where to start .
Thanks
I have removed back cover and checked voltages . Stby voltage 3.3V is working and red led on power supply stays on . Have removed ysus and xsus board cables no difference . Have checked all supply rails to see if they come up for that brief second and they do . Is there a way to force power supply with a 1k resistor across stby and 3.3volt line ? Not sure where to start .
Thanks