Samsung LN46B64R3F parts?

[ivtec]

Hi guys; i found in the curve this Samsung LN46B640R3FXZA with broken screen,i got it apart and took out all boards including the lamp backlights.
my question do these CCFL lamp back-lights fit to any other 46" led tv? don't if any of these boards are any good,but there are good parts for any other future repairs,see pic attach; thanks

[Techstar]

Re: Samsung LN46B64R3F parts?

All parts should be saved out of any scrap tv. I always salvage backlights both CCFL and LED strips. The boards can either be sold on e bay or used as replacement boards on future repairs . I have loads of storage space so am lucky to have the room to store the bits. For me I have almost an addiction to collecting scrap tv parts . I love having lots of boards to practice de soldering the many types of chips and other bits. I save every single backlight from broken screens. I have a nice collection now.

[attainteddragon]

Re: Samsung LN46B64R3F parts?

they will fit many other ccfl backlight tv's, but not led.
the only catch when you change out a single ccfl is that some have a tint to them, blue or yellowish. but if you put the slightly off one on the very top or bottom, it normally isnt noticeable.

i have a couple of boxes full and are annoying to store. i just write the length and diameter add length on a piece of paper and tape it to each set.

you could of jumped the ps on to see if the ps and inverter was ok before you stripped it.

[ivtec]

Re: Samsung LN46B64R3F parts?

Thanks guys; i also have a whole bunch of boards from different brands,i normally if screens are broken i strip them right on the spot. and leave the panels and such in there,and bring boards home