IQ SMART TV 22" weird problem

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • rippergr
    Badcaps Veteran
    • May 2014
    • 345
    • Ελλάδα

    #41
    Re: IQ SMART TV 22" weird problem

    Originally posted by dskall
    You can try heating/cooling different areas of mainboard to see if it makes a difference.
    You mean with power on or witout?
    How can I heat it locally? I have hot air station but I can heat it while it is on place because it will destroy the screen and if I remove it it will cool before I turn it on

    Comment

    • dskall
      Badcaps Legend
      • Oct 2016
      • 2905
      • usa

      #42
      Re: IQ SMART TV 22" weird problem

      With power on you can heat or freeze to see if it will come on.
      I assume no responsibility for any stupid suggestions I might post.

      Comment

      • amirabueno
        Member
        • Jan 2014
        • 10
        • Philippines

        #43
        Re: IQ SMART TV 22" weird problem

        use ESR tester/Blue Tester to check all capacitor..

        Comment

        • amirabueno
          Member
          • Jan 2014
          • 10
          • Philippines

          #44
          Re: IQ SMART TV 22" weird problem

          SMPS most problem is capacitor

          Comment

          • rippergr
            Badcaps Veteran
            • May 2014
            • 345
            • Ελλάδα

            #45
            Re: IQ SMART TV 22" weird problem

            I have changed all capacitors except the top one(the green) and the 400V capacitor

            Comment

            • rippergr
              Badcaps Veteran
              • May 2014
              • 345
              • Ελλάδα

              #46
              Re: IQ SMART TV 22" weird problem

              I have it working now for over a week with no problem. Without changing anything.

              Comment

              • attainteddragon
                Badcaps Veteran
                • Apr 2013
                • 764
                • australia

                #47
                Re: IQ SMART TV 22" weird problem

                so what have you done to remedy the fault?
                WHY CAN'T PHILIPS USE PHILLIPS HEAD SCREWS?

                Comment

                • rippergr
                  Badcaps Veteran
                  • May 2014
                  • 345
                  • Ελλάδα

                  #48
                  Re: IQ SMART TV 22" weird problem

                  Originally posted by attainteddragon
                  so what have you done to remedy the fault?
                  Nothing, it just working for now. If I use it this way one day it will just stop working again for one-two days (sometimes more) and then starts working again

                  Comment

                  Related Topics

                  Collapse

                  • m1ch43lzm
                    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                    by m1ch43lzm
                    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                    05-12-2025, 08:37 PM
                  • huj3r
                    Sony KDL-40Z4500 LCD with stripes and 9 blinks (possible BGC board or harness problem
                    by huj3r
                    Hi there!

                    I have a Sony Bravia KDL-40Z4500 which shows a colored vertical stripes pattern when turning on, with a central black shadow that slowly dissipates within the first 10 seconds.

                    Photo of the situation after the black shadow dissipates:

                    After this behavior the red LED will blink 9 times, then pause for a bit, and blink again 9 times, in a loop.

                    I checked the manual (available here) and this corresponds to "HFR error", quoting from the manual:

                    > This indicates HFR Communication error. [ HFR Communication...
                    08-15-2023, 10:55 AM
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    11-22-2024, 01:46 PM
                  • howardc64
                    A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                    by howardc64
                    Problem

                    This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                    08-04-2024, 10:36 PM
                  • lostone
                    Looking for help with a Viewsonic VP230mb where the backlight comes on only momentarily
                    by lostone
                    Hello, I came here after finding some similar questions asked on other monitors and hope someone here can help me get an ancient Viewsonic VP230mp (23" 4:3 LCD) back to working condition.

                    First a little background, I have a background in computer and electrical engineering, and I'm smart enough to know I know nothing about LCD displays and how they work. For this topic I'm as green as they come.
                    When the display is turned on the viewsonic logo displays in the uppper left for 2 seconds then the screen goes black, the power LED is green (on) and when a computer is connected...
                    05-19-2024, 11:40 AM
                  • Loading...
                  • No more items.
                  Working...