Standby led flashes 6 times then pauses and repeats in this loop. There is no flash of the screen after each 6th flash so apparently no attempted start.
Tried chill spraying the eproms on 17mb82s main board fitted to see if it can be forced to load but no luck. Suspect a failed software issue but previous repairs of this model have attempted to start with just backlights only before switching off and on loop. I know i can obtain the software from OHMs but just wondering whether anybody could help with suitable 82s software for this model. I believe 82s Hitachi software would also work.Many thanks in advance for any help.
Tried chill spraying the eproms on 17mb82s main board fitted to see if it can be forced to load but no luck. Suspect a failed software issue but previous repairs of this model have attempted to start with just backlights only before switching off and on loop. I know i can obtain the software from OHMs but just wondering whether anybody could help with suitable 82s software for this model. I believe 82s Hitachi software would also work.Many thanks in advance for any help.