Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • lotas
    replied
    Originally posted by jorpec
    I really appreciate if any member could share a dump for a TV LED Blaupunkt 39/401l, or some other brand that uses the same mainboard/panel combo, the tv is stuck in standby

    Modelo Nr: 39/401L-GB-5B-1HUHBKUP-EU
    Modelo Ref: B39A401TCUHD

    Mainboard: TP.MSD309.BTU87
    Panel: v390DK1-LS1


    Thanks in advance
    Post your original, non-working dump here, I'll take a look and see if I can fix it for you.

    Have you been looking for this dump for 5 years?
    https://www.badcaps.net/forum/troubl...53#post1325853
    Last edited by lotas; 08-27-2024, 04:18 AM.

    Leave a comment:


  • jorpec
    replied

    I really appreciate if any member could share a dump for a TV LED Blaupunkt 39/401l, or some other brand that uses the same mainboard/panel combo, the tv is stuck in standby

    Modelo Nr: 39/401L-GB-5B-1HUHBKUP-EU
    Modelo Ref: B39A401TCUHD

    Mainboard: T.MSD309.BTU87
    Panel: v390DK1-LS1


    Thanks in advance

    Leave a comment:


  • yokoono
    replied
    Originally posted by Ben198585
    Hi, anyone got panel firmware
    17Mb110
    VES500UNDC-2D-N12
    Thanks In advance
    What problem does the image have?​

    Leave a comment:


  • Ben198585
    replied
    Hi, anyone got panel firmware
    17Mb110
    VES500UNDC-2D-N12
    Thanks In advance

    Leave a comment:


  • juanka730
    replied
    Hello, good vibes for everyone, I need a dump of a Toshiba 37AV52R TV, card number STA40T VTV-L4008 REV:1
    from 2008/12/18.
    If anyone can help me, I'd appreciate it, the LCD is old but still works.​

    Leave a comment:


  • lotas
    replied
    Originally posted by otoboy

    Good day to Everyone!

    The exact marking on the chip is cFeon Q32B-104HIP AHF5593 1201TMA
    Place it like in the picture.
    Attached Files

    Leave a comment:


  • otoboy
    replied
    Originally posted by lotas

    What is the exact marking of your chip?

    Cipul dumneavoastră nu este instalat corect.
    Good day to Everyone!

    The exact marking on the chip is cFeon Q32B-104HIP AHF5593 1201TMA

    Leave a comment:


  • cccamgeek
    replied
    Originally posted by Ipyong tech
    hello,
    I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
    i have backup of the original file. can please check my dump if its ok. Thank you.
    Hello.. Master lotas.. need your help. thank you
    Dear my be you have a schort in th e12V rile ; try to find a bad cap or back converter dc/cd is that is schort

    Leave a comment:


  • lotas
    replied
    Originally posted by otoboy

    We just bought an EZP2023+ and unfortunately I can't get it to dump as it can't be detected.
    What is the exact marking of your chip?

    Cipul dumneavoastră nu este instalat corect.
    Attached Files
    Last edited by lotas; 07-31-2024, 02:08 AM.

    Leave a comment:


  • otoboy
    replied
    Originally posted by otoboy

    Thank you! The TV is always on standby mode and there's no picture or sound. Unfortunately we haven't purchased the device yet that does that (dump or program an eeprom) nor a spare similar device to cross check. We already checked the board and suspected its the chip labeled as V502 on the board. This is our first time to handle this challenge. Thanks in advance
    We just bought an EZP2023+ and unfortunately I can't get it to dump as it can't be detected.
    Attached Files

    Leave a comment:


  • terminalscript
    replied
    Hello everyone , hope y'all doing great ,
    i'm looking for dump eeprom for Samsung UE32J5570S , Main board : BN41-02353B , thank u very much much appreciated

    Leave a comment:


  • lotas
    replied
    Yes, U502

    Leave a comment:


  • otoboy
    replied
    Originally posted by lotas

    What is the problem with the TV, post your original dump here, if it is not working, I will try to restore it for you.
    Thank you! The TV is always on standby mode and there's no picture or sound. Unfortunately we haven't purchased the device yet that does that (dump or program an eeprom) nor a spare similar device to cross check. We already checked the board and suspected its the chip labeled as V502 on the board. This is our first time to handle this challenge. Thanks in advance

    Leave a comment:


  • lotas
    replied
    Originally posted by otoboy
    Hello, Good day. I am looking for Firmware or eeprom BIN for 40-MS822S0-MAD2XG TCL TV LED32D3300. Let me know if you need anything else. Thanks in advance

    Panel TCL LVW320CSTT E1
    What is the problem with the TV, post your original dump here, if it is not working, I will try to restore it for you.

    Leave a comment:


  • otoboy
    replied
    Hello, Good day. I am looking for Firmware or eeprom BIN for 40-MS822S0-MAD2XG TCL TV LED32D3300. Let me know if you need anything else. Thanks in advance

    Panel TCL LVW320CSTT E1
    Attached Files

    Leave a comment:


  • Ipyong tech
    replied
    thank you.. master lotas for checking my dump... now i know that my dump is good. the problem maybe somewhere in motherboard.

    Leave a comment:


  • lotas
    replied
    Originally posted by Ipyong tech
    hello,
    I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
    i have backup of the original file. can please check my dump if its ok. Thank you.
    Hello.. Master lotas.. need your help. thank you
    Mainboard ?
    I don't see a problem with your dump, it's working.
    Last edited by lotas; 07-23-2024, 02:42 AM.

    Leave a comment:


  • Ipyong tech
    replied
    hello,
    I have samsung tv UA65NU7300g no power, no standby light but if i remove the connector of motherboard the backlight is working and 12.8 volts is present. need help for dump file of IC1604 25q40cl.
    i have backup of the original file. can please check my dump if its ok. Thank you.
    Hello.. Master lotas.. need your help. thank you
    Attached Files

    Leave a comment:


  • kamaku
    replied
    Yes was not working, "power-up, logo and reset" .
    Finally loaded the firmware for one "ok odl 32631H-SB EL" from post https://www.badcaps.net/forum/troubl...64#post1683821 , worked only remote control is diferent and used one universal one.
    Thanks

    Leave a comment:


  • lotas
    replied
    Does not work?

    Leave a comment:

Related Topics

Collapse

  • (0)_(0)
    Looking for a HP Photosmart C4280 EEPROM dump
    by (0)_(0)
    Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.

    The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...
    02-17-2022, 09:09 PM
  • my2k2
    Harman Kardon AVR 171, Request for IC1504 (24C32) eeprom dump file
    by my2k2
    Good day to every one,

    I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
    Does anybody have an eeprom dump file? I really appreciate any help.
    Thanks in advance.
    07-01-2024, 09:04 PM
  • Whale linguini
    p14s Gen 2 thunderbolt eeprom dump
    by Whale linguini
    P14s Gen 2
    HT4B0/HP4B0/HT5B1/HT4B2
    NM-D352 Rev 1.0
    sn PF-35P15W

    Requesting thunderbolt dump

    also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work....
    09-03-2024, 01:56 PM
  • Ancient1
    Before I dump this Panel...
    by Ancient1
    Hi

    I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists

    As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).

    Right distribution board, 2 Flexs, near them:
    The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
    The other, pressing on the Panel to the Chassey and the lines disappears 99.99%

    I...
    10-23-2022, 11:07 AM
  • jimha
    LG 34UC99 EEPROM dump
    by jimha
    Hi ,

    I'm looking for a dump to repair my screen

    Thanks
    12-09-2024, 03:52 PM
  • Loading...
  • No more items.
Working...