Re: Eeprom dump thread!
Lg 42lm20s - ze ana
kart: Gp4 ld22 * / lc22 *
eax64307906 (1.0)
11.12.01 phj
Anyone have an eprom?
Lg 42lm20s - ze ana
kart: Gp4 ld22 * / lc22 *
eax64307906 (1.0)
11.12.01 phj
Anyone have an eprom?
-
-
Re: Eeprom dump thread!
Chassis 17mb62-2.6
Model toshiba 26dl933g
Panel LC260EXN-SDA3
I need firmware mboot.bin mb62_en.bin auto_update_mb62.txtComment
-
https://www.badcaps.netComment
-
Samsung UE50MU6120k
Hi all , has anyone got an eeprom dump for a
Samsung UE50MU6120k
UE50MU6120KXXU
BN94-12644K / BN41-02568B
Screen number CY-GK050HGNVHH
B.Rgds
John
Comment
-
Re: Eeprom dump thread!
Hi
I am in need of a: Telefunken TE43472s29y2k
mainboard: vestel 17mb211
Panel: ves430undl-2d-n12
ThanksComment
-
Re: Eeprom dump thread!
Looking for firmware file for Westinghouse WD55UDR101.
Mainboard: CV6488H-A
Panel:KW170912Comment
-
Re: Eeprom dump thread!
Looking for Eeprom and NAND flash for a bootlooping
SAMSUNG UE40D5520
Part # K9GAG08U0E (NAND)
Mainboard: BN41-01660B
Thanks in advance.Comment
-
Re: Eeprom dump thread!
hi,im looking for a eeprom for rca 32'' rlded3258a-c canada, panel is cn32b22aComment
-
https://www.badcaps.netComment
-
Re: Eeprom dump thread!
Hello, I need for my Telefunken T40R912 DVB-CTS2
Main: 17MB70-5P V1
Panel: LTA400HM07 Samsung
a firmware because the wrong panel firmware is installed. LED only flashes and shows no picture (wrong firmware was installed.Comment
-
Re: Eeprom dump thread!
Hello. Anyone please, help me with the EEPROM dump for LG 37LC51-ZA.
Thank you in advance.Comment
-
Re: Eeprom dump thread!
Thankyou for sharing this info and dumps
Comment
-
Re: Eeprom dump thread!
GoodComment
-
Re: Eeprom dump thread!
i need aoc 29 inch softwerComment
-
Re: Eeprom dump thread!
aoc 32a333061Comment
-
Re: Eeprom dump thread!
Does anyone have dumps for the Samsung BN41-01950c board, I believe its 2 spi chips an emmc chip and possibly a 24c51 serial eeprom.
Thanks in advance.
UE55F9000
Main board bn41-01950cLast edited by nfrancis1963; 02-17-2021, 10:05 AM.Comment
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.07-26-2025, 03:24 PM -
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I...
Comment