-
-
Re: Eeprom dump thread!
hi, i am looking for the eeprom for a Samsung UE55MU6102K -BN41-02568B / BN94-12765W - panel CY-GM055HGLV3H.
The tv doesn't power on (led blink and stay red).
Non-working dump here.
ThanksComment
-
Re: Eeprom dump thread!
Thank you lotas.
This new file does not change nothing, TV doesn't start.
After flashing the 25q40 i verify the data and it was good. I also put status register to 0x88 and 0x42 after writing using NeoProgrammer 2.2.0.10
After starting the TV, now the 25q40 content is not exactely the same : from address 0006F000 to 0006F17D 0xFF are replaced by other values and from address 00070000 to 00070DDF initial values are replaced by 0xFFComment
-
Re: Eeprom dump thread!
hi
can you pleae send the eprom file of this :
TCL L49P32CFS TPD.NT72563.PB773 NT63PComment
-
Re: Eeprom dump thread!
hi, i am looking for the eeprom for VESTEL 17MB82S
VES49OUNDL-2D-N02
23280894Comment
-
Re: Eeprom dump thread!
HI,I'm looking for dump for samsung UE48H6400AK.Anyone has it?
panel CY-GH048CSLV2H
model UE48H6400AKXXH
main BN94-07902S HVT2
.Last edited by SMDFlea; 05-12-2023, 01:52 PM.Comment
-
Re: Eeprom dump thread!
sorry,spy flash 25Q40Comment
-
Re: Eeprom dump thread!
problem is five double blinksComment
-
Re: Eeprom dump thread!
Well, 5 blinks, it can be anything, the backlight lights up when the mainboard is disconnected from the power supply.Comment
-
Re: Eeprom dump thread!
yes,it remains onComment
-
tv samsung smart UE22H5600AK
hi help me i want this fils thanks
EMMC + FLASH + EEprom
Châssis Samsung UE22H5600AK (carte principale) : HIGH_X14H_U02_SMALL BN41-02148A (BN94-08039S)Comment
-
Re: Eeprom dump thread!
Hi everyone,,I'm in need of eeprom file for Samsung un55ku6290fxza . I would appreciate any attempt to help.ThanksComment
-
Re: Eeprom dump thread!
Hello, I need a dump of U13, U16, U11
Brand: Medion
Model: MD31230 DES-A 65
Chassis (plate or major components): VESTEL 17MB120
Matrix/Panel (if child): VES650QNTA-2D-U12
Other (notes): U13,U11 SPI 25l1606e NAND U11 29f4g08abaea
Symptoms: The TV does not turn on, only the blue LED is on, no 5v on USB
Sorry for my EnglishComment
-
Re: Eeprom dump thread!
Hello, I need a dump of LG 32LM637BPVA
Main board :EAX68167602(1.0)Comment
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.07-26-2025, 03:24 PM -
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I...
Comment