Eeprom dump thread!

[lotas]

Re: Eeprom dump thread!

Hi, I need the bin file for Magnavox 55ME314V/F7 A4GR1MMA, panel U4DR0XH. I have the DUMP file but is corrupted, I am using the BIN file for the DS3 but I got inverted picture. Thanks

Post your non-working dump here, I'll try to fix it.

[luzmina]

Re: Eeprom dump thread!

Here it is. Thanks

[lotas]

Re: Eeprom dump thread!

Here it is. Thanks

Try this Dump.

[luzmina]

Re: Eeprom dump thread!

The fixed file works!!! but the picture is still inverted, same as when using the 55ME314V/F7 DS3 file, Thanks

[lotas]

Re: Eeprom dump thread!

The fixed file works!!! but the picture is still inverted, same as when using the 55ME314V/F7 DS3 file, Thanks

Here you need to try to enter the service mode through the remote control (you need to know exactly what code to dial on the remote control) and change the "mirror" item to ON or OFF.

[mnjoao]

Re: Eeprom dump thread!

good afternoon, along with the dump that works
thanks

[mnjoao]

Re: Eeprom dump thread!

good afternoon, along with the dump that works
thanks

[Storyteller12]

Re: Eeprom dump thread!

Hello , some one can share with me the EEPROM DUMP FOR Samsung tv UN60H7150 . Thank you in Advance .

I tried to read the eeprom for you but was unable to. Tv does work and has no problems at all.

For some reason this eeprom wont read. I tried a few others and they all read no problem.

Is there a trick to reading this one?

[vinceroger69]

Re: Eeprom dump thread!

Firmware needed please for a polaroid p43d300fp
lcd panel VES430UNDA-2D NI2
MAINBOARD 17MB110P 23397404

[yokoono]

Re: Eeprom dump thread!

Firmware needed please for a polaroid p43d300fp
lcd panel VES430UNDA-2D NI2
MAINBOARD 17MB110P 23397404

For me in the archive is mb110 not 110p. If you want you can try.
https://files.fm/u/ve6hh359y

[vinceroger69]

Re: Eeprom dump thread!

For me in the archive is mb110 not 110p. If you want you can try.
https://files.fm/u/ve6hh359y

Thankyou i will give it a try is it best too remove the ic and programe it that way using a ch341a

Edit just downlaoded the file i tried to extract it says no archive is either unknown format or damaged i have tried downlaoding it twice

[vinceroger69]

Re: Eeprom dump thread!

For me in the archive is mb110 not 110p. If you want you can try.
https://files.fm/u/ve6hh359y

Changed to a diffrent pc downloaded files ok if using a ch341a which files do add? i have never really used a ch341a before thanks

[yokoono]

Re: Eeprom dump thread!

Thankyou i will give it a try is it best too remove the ic and programe it that way using a ch341a

Edit just downlaoded the file i tried to extract it says no archive is either unknown format or damaged i have tried downlaoding it twice

I checked. The archive is good. Use another unzipped or newer version. Installation is done from the stick not with CH341.
Do you know the installation procedure for Vestel electronics?

[vinceroger69]

Re: Eeprom dump thread!

I checked. The archive is good. Use another unzipped or newer version. Installation is done from the stick not with CH341.
Do you know the installation procedure for Vestel electronics?

I picked two sets up yesterday for free both seem too have firmware issues, i have just ordered remotes for both sets so cant try the firmware until remote comes.
please can you explaine the update procedure step by step and i will give it ago i have 1gb and 2gb usb memory sticks so hope that will be ok. Thankyou for your help.

[vinceroger69]

Re: Eeprom dump thread!

.

[yokoono]

Re: Eeprom dump thread!

I picked two sets up yesterday for free both seem too have firmware issues, i have just ordered remotes for both sets so cant try the firmware until remote comes.
please can you explaine the update procedure step by step and i will give it ago i have 1gb and 2gb usb memory sticks so hope that will be ok. Thankyou for your help.

You need the remote control for installation. The installation is done with the OK key.

[vinceroger69]

Re: Eeprom dump thread!

You need the remote control for installation. The installation is done with the OK key.

Hopefully remote will come either today or tomorrow, what format do i need too wipe usb stick with and could you please tell me the procedure i will print if off for future refrence thanks.

[yokoono]

Re: Eeprom dump thread!

1. Format a stick with FAT32
2. Unzip and put the 4 files directly on the stick
3. Insert the stick into the TV
4. Press and hold the OK key on the remote control
5. Plug in the TV
6. The TV's stby LED flashes slowly and then quickly. Now release the OK key
7. Wait for it to finish. It may take 5-10 minutes.
If after this operation the remote control is no longer useful, use a programmable one or a Vestel one.

[vinceroger69]

Re: Eeprom dump thread!

1. Format a stick with FAT32
2. Unzip and put the 4 files directly on the stick
3. Insert the stick into the TV
4. Press and hold the OK key on the remote control
5. Plug in the TV
6. The TV's stby LED flashes slowly and then quickly. Now release the OK key
7. Wait for it to finish. It may take 5-10 minutes.
If after this operation the remote control is no longer useful, use a programmable one or a Vestel one.

Thank you i will try it once the remote arrives.

[vinceroger69]

Re: Eeprom dump thread!

Thank you i will try it once the remote arrives.

Hi remote came and mainboard will not take the update at all i just get a brief flash of backlight at power on ( i do have a diffrent mainboard that uses the same panel the tv powers on and works ok) i cant keep this board in the set as is missing some ports like scart rca plugs extra hdmi port but board swap proves psu and backilights work fine so must be a fault on main bga ic i guess.