LG 50PK550 clicking - plasma newbie

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #81
    Re: LG 50PK550 clicking - plasma newbie

    No need to do anything now just make sure the female end is seated properly and then do the resistance test, use 200 Ohms scale.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • jason424
      Senior Member
      • Dec 2015
      • 187
      • United States

      #82
      Re: LG 50PK550 clicking - plasma newbie

      Originally posted by budm
      Check the resistance between the LINE (HOT) prong of the AC male plug and the red connector with Brown wire, see what you get, then check the resistance between the Neutral prong of the AC plug and the red connector with the blue wire to see what you get.
      That female end of the power cord does not look like it is inserted all the way in.
      I get .4 for resistance on the Hot/Brown. And I get .7 for the Neutral/blue.

      Comment

      • vinceroger69
        Badcaps Legend
        • Mar 2012
        • 6714
        • uk

        #83
        Re: LG 50PK550 clicking - plasma newbie

        when you touch both your multi meter leads together on 200 ohms whats you meter read?

        Comment

        • jason424
          Senior Member
          • Dec 2015
          • 187
          • United States

          #84
          Re: LG 50PK550 clicking - plasma newbie

          00.3 not sure why it's not at 0.00 any more...meter bad? Is there a way to zero it?

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #85
            Re: LG 50PK550 clicking - plasma newbie

            no not bad thats about what mine reads have you tested another item in the wall outlet to make sure its ok and works as i have no idea now why you have no mains voltage to that connector on the pcb hopefully budm can advise further
            also have you got another item you can check your meter works on ac mode and reads 120v or whatever your voltage usually is be carefull though as mains voltage
            Last edited by vinceroger69; 01-19-2017, 03:54 PM.

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #86
              Re: LG 50PK550 clicking - plasma newbie

              So the wiring is good all the way one end of AC male plugs to the connector end of the circuit board, but yet no 120Vac present at the Brown and Blue wire's ends.
              So you are sure that
              1) you do have 120vac at the outlet.
              2) you are making good contact with the two legs of the red incoming AC connector.
              3) operator error.
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk

                #87
                Re: LG 50PK550 clicking - plasma newbie

                thanks budm im still learing but was trying to go by step by step how i would trace this fault myself its just explaining things/terms to use i still get stuck with.

                Comment

                • jason424
                  Senior Member
                  • Dec 2015
                  • 187
                  • United States

                  #88
                  Re: LG 50PK550 clicking - plasma newbie

                  It was operator error, more so meter error. I went to test my outlet and my meter wouldn't turn on. I went out and got my better meter (GDT-11) and the red connector tests 125.5 volts at the red connector/brown and blue wires.

                  I apologize for the goose chase with my junk/cheap meter.

                  Comment

                  • budm
                    Badcaps Legend
                    • Feb 2010
                    • 40746
                    • USA

                    #89
                    Re: LG 50PK550 clicking - plasma newbie

                    So all the power cord ends, red connector, and AC male plugged in properly and you do have 120VAC at the AC wall outlet, meter set to 200VAC and you put one of your meter probe at L, another one at N, the meter shows 0 VAC, correct?
                    Notes: we already verified that the resistance between the L on the red connector and AC plug L has < 1 Ohm, same for N on the red connector and the AC plug.
                    Attached Files
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment

                    • jason424
                      Senior Member
                      • Dec 2015
                      • 187
                      • United States

                      #90
                      Re: LG 50PK550 clicking - plasma newbie

                      No now with one on L and the other on N,I have 125.5.

                      Comment

                      • vinceroger69
                        Badcaps Legend
                        • Mar 2012
                        • 6714
                        • uk

                        #91
                        Re: LG 50PK550 clicking - plasma newbie

                        now you have ac power to the set check what dc voltages you have on the connector in post 66

                        Comment

                        • budm
                          Badcaps Legend
                          • Feb 2010
                          • 40746
                          • USA

                          #92
                          Re: LG 50PK550 clicking - plasma newbie

                          Never mind, test equipment error.
                          Last edited by budm; 01-19-2017, 04:51 PM.
                          Never stop learning
                          Basic LCD TV and Monitor troubleshooting guides.
                          http://www.badcaps.net/forum/showthr...956#post305956

                          Voltage Regulator (LDO) testing:
                          http://www.badcaps.net/forum/showthr...999#post300999

                          Inverter testing using old CFL:
                          http://www.badcaps.net/forum/showthr...er+testing+cfl

                          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                          http://s807.photobucket.com/user/budm/library/

                          TV Factory reset codes listing:
                          http://www.badcaps.net/forum/showthread.php?t=24809

                          Comment

                          • jason424
                            Senior Member
                            • Dec 2015
                            • 187
                            • United States

                            #93
                            Re: LG 50PK550 clicking - plasma newbie

                            I've unplugged the connector that leads to the video board and tested the 18 pins (stacked 9+9) of the female connector on the board and don't get any voltage to any of them.
                            Attached Files

                            Comment

                            • vinceroger69
                              Badcaps Legend
                              • Mar 2012
                              • 6714
                              • uk

                              #94
                              Re: LG 50PK550 clicking - plasma newbie

                              ti think it was just his faulty meter budm now hes swopped too a new one maybe he will have some dc readings too as he didnt even have 5v stby not sure if you have read the whole thread budm but he fitted a new ic and when i asked him to clean the board one pad was lifted hence the red wire to join the tracks since then board seems dead no lights no clicking etc
                              Last edited by vinceroger69; 01-19-2017, 04:57 PM.

                              Comment

                              • vinceroger69
                                Badcaps Legend
                                • Mar 2012
                                • 6714
                                • uk

                                #95
                                Re: LG 50PK550 clicking - plasma newbie

                                Originally posted by jason424
                                I've unplugged the connector that leads to the video board and tested the 18 pins (stacked 9+9) of the female connector on the board and don't get any voltage to any of them.
                                is your neter on dc volts black probe on tv metal chassis?

                                Comment

                                • jason424
                                  Senior Member
                                  • Dec 2015
                                  • 187
                                  • United States

                                  #96
                                  Re: LG 50PK550 clicking - plasma newbie

                                  Yes set at 200. I get nothing, except when I get to the 4th pin on the bottom instead of just "0.00" I get "-0.00" so the negative symbol (-) comes up. Looks like that pin is marked as "ERROR DET"

                                  Comment

                                  • vinceroger69
                                    Badcaps Legend
                                    • Mar 2012
                                    • 6714
                                    • uk

                                    #97
                                    Re: LG 50PK550 clicking - plasma newbie

                                    when your testing these voltages are all the boards connected if not try measuring again with alll connecting wires etc in place

                                    Comment

                                    • jason424
                                      Senior Member
                                      • Dec 2015
                                      • 187
                                      • United States

                                      #98
                                      Re: LG 50PK550 clicking - plasma newbie

                                      Power cord is plugged in to an outlet and all cables are connected except the one at that connector I'm testing.

                                      Comment

                                      • vinceroger69
                                        Badcaps Legend
                                        • Mar 2012
                                        • 6714
                                        • uk

                                        #99
                                        Re: LG 50PK550 clicking - plasma newbie

                                        thats the one i mean plug it back in and maybe carefully touch the pins on the connector itself i dont know if the main board needs to be connected to get voltages etc. Hopefully reece or budm may advise us more regarding all the missing dc voltages
                                        Last edited by vinceroger69; 01-20-2017, 01:30 PM.

                                        Comment

                                        • jason424
                                          Senior Member
                                          • Dec 2015
                                          • 187
                                          • United States

                                          #100
                                          Re: LG 50PK550 clicking - plasma newbie

                                          I plugged that cable in and still get 0.00 across all pins (pic) with black on metal chassis.

                                          And I do still have 125 volts at the red connector
                                          Attached Files

                                          Comment

                                          Related Topics

                                          Collapse

                                          • bffargo
                                            2014 LG 60" Plasma shut down just clicking unless I disconnect 17V line to main CPU
                                            by bffargo
                                            LG 60PB66550 NOV 2014
                                            PSU: EAY63168603
                                            PCB: EAX65359531 2013.11.01 Rev:1.0

                                            Main board: EAX65399305(1.0) 13.11.27 PU42A/PA42A/PD42A

                                            Symptom:
                                            While watching, just went black and started clicking relay every few seconds.

                                            Initial diagnosis:
                                            Removing JUST the main CPU/Input PCB from circuit stops the clicking. No problems with any other boards/drivers. (Removing all other boards and only putting Main back in is all it takes to start clicking again)

                                            Deeper diagnosis:
                                            Pulling pins #1/#2 (Blue/Grey) from the connector housing...
                                            09-09-2022, 07:34 PM
                                          • B0r1s
                                            Samsung UE49KS7000SXXH - fast clicking sound in standby mode
                                            by B0r1s
                                            PSU - BN44-00878A

                                            Symptoms:

                                            The TV turned itself off, and I haven't been able to turn it back on. The standby voltage was unstable and lower than it should be.
                                            A weak clicking sound was coming from the transformer.

                                            Video with clicking sound:https://www.youtube.com/watch?v=lAduhjNtqCA

                                            Progress:

                                            After the transformer, I measured four Schottky diodes. DM862C and DM864C diodes readings were 003 in both directions. After detaching them from the circuit and measuring them, DM864C was the shorted one. These Schottky diodes are SB550.I...
                                            01-17-2023, 04:58 PM
                                          • novak2
                                            Panasonic th-42px60en plasma TV takes time to turn on and make clicking noises
                                            by novak2
                                            Hello there,

                                            I recently bought a Panasonic th-42px60en plasma TV second hand. The problem is :
                                            The TV takes time to turn on from cold (being unplugged from the night for example), it tries to turn on with the clicking sound, then shuts off, then retries and so on. The TV is still working, just it takes time to boot.

                                            From what I've read it seems to be bad capacitors on the power board, but I just want to see if anyone had the same problem with this TV.

                                            Thanks in advance.
                                            09-25-2020, 02:34 PM
                                          • slimmy182
                                            [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
                                            by slimmy182
                                            Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

                                            I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

                                            Looking on google I found this:...
                                            01-14-2023, 11:55 AM
                                          • beetle1303
                                            Carver CM-1090 - Power relay clicking on & off, then fuse blown after 20-30 seconds of power cycling.
                                            by beetle1303
                                            I gotten a Carver CM-1090 amplifier from a friend who has kept it in storage for decades. Opened it up, thick layer of dust cumulated everywhere. Vacuumed it semi-cleaned, and blown off as much as possible the remaining dust. This is a 220V version.

                                            On initial powered up with nothing connected - it works with all the lights and button indicator lit up as pressed, etc. I then powered off, connected a CD player into the CD RCA input and powered it on. It seemed to work for a short while and when I turned the volume up and down to see the the VUs works, the power started to clicked off...
                                            01-13-2025, 08:49 PM
                                          • Loading...
                                          • No more items.
                                          Working...