50PC1D Help Psu Shutting Down ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ReeceyBurger123
    Never Give Up !
    • May 2014
    • 7325
    • Britain

    #21
    Re: 50PC1D Help Psu Shutting Down ?

    I had already replaced the caps before it blew, with vlesr Pannys so thats not the cause. I had also replaced the heatsink on the Mb and added one to the Tcon Bga Ic as preventative measures dunno if you've seen my vid on this set ? I do that all the time before testing, replace them caps.

    These are full of faults, you heard of the Zsus fault where every 45F122 IGBT shorts I think over 9 in total blow lol. Would you sell me your sus boards or whole Tv lol ? If not it will have to be put aside for a few weeks like thw PC1D.
    Last edited by ReeceyBurger123; 10-27-2016, 02:56 PM.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment

    • Alastair E
      Chief Womble
      • Mar 2013
      • 1963
      • U.K.

      #22
      Re: 50PC1D Help Psu Shutting Down ?

      Nah--with mine, Defo PSU issue as I swapped out its original to repair a set with this fault--leaving me with this intermittent PSU--And the VZ-Bias blow-up, like yours....

      Bloody things haunt me these days!
      TELEFIX

      How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
      http://www.irf.com/technical-info/appnotes/an-1088.pdf
      PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

      Comment

      • Alastair E
        Chief Womble
        • Mar 2013
        • 1963
        • U.K.

        #23
        Re: 50PC1D Help Psu Shutting Down ?

        Ive got a 50PC1da --actually two of 'em if you're interested....
        TELEFIX

        How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
        http://www.irf.com/technical-info/appnotes/an-1088.pdf
        PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

        Comment

        • ReeceyBurger123
          Never Give Up !
          • May 2014
          • 7325
          • Britain

          #24
          Re: 50PC1D Help Psu Shutting Down ?

          I might just bin this and the PC1D running out of time and space at my nans house and my place. I love Plasma but they just take so much time up.
          Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

          https://www.facebook.com/Telford-Tel...7894576335359/

          Comment

          • ReeceyBurger123
            Never Give Up !
            • May 2014
            • 7325
            • Britain

            #25
            Re: 50PC1D Help Psu Shutting Down ?

            Originally posted by Alastair E
            Ive got a 50PC1da --actually two of 'em if you're interested....
            What are the faults matey ? Also got stands and remotes ? And screens in good condition ?
            Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

            https://www.facebook.com/Telford-Tel...7894576335359/

            Comment

            • Alastair E
              Chief Womble
              • Mar 2013
              • 1963
              • U.K.

              #26
              Re: 50PC1D Help Psu Shutting Down ?

              No remotes one works--but has repaired IPM and one stand between 'em.

              Other Ive had for ages--haven't even plugged it in!
              TELEFIX

              How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
              http://www.irf.com/technical-info/appnotes/an-1088.pdf
              PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

              Comment

              • ReeceyBurger123
                Never Give Up !
                • May 2014
                • 7325
                • Britain

                #27
                Re: 50PC1D Help Psu Shutting Down ?

                Id buy them but how much for your PS3000 really dont know if I can be arsed with this one ? I cant drive yet f bud but 4 weeks till my test, can easily get the, in my Corsa as well.
                Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                https://www.facebook.com/Telford-Tel...7894576335359/

                Comment

                • Alastair E
                  Chief Womble
                  • Mar 2013
                  • 1963
                  • U.K.

                  #28
                  Re: 50PC1D Help Psu Shutting Down ?

                  Swap you the PS (with hopefully good psu) for the two PC....?
                  TELEFIX

                  How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
                  http://www.irf.com/technical-info/appnotes/an-1088.pdf
                  PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

                  Comment

                  • ReeceyBurger123
                    Never Give Up !
                    • May 2014
                    • 7325
                    • Britain

                    #29
                    Re: 50PC1D Help Psu Shutting Down ?

                    Deal, send me a Pm on facebook to arrange this
                    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

                    https://www.facebook.com/Telford-Tel...7894576335359/

                    Comment

                    Related Topics

                    Collapse

                    • legg
                      LG 42PC3 buffer output doesn't follow YSUS
                      by legg
                      LG42PC3D -UD originally with green lamp but no display or audio.
                      Owner says was working, then went 'pop'.
                      All 5V caps bulging. replaced.
                      All PSU output voltages within spec but -Vy is low on YSUS.
                      One of three parallel fets between SUS_OUT and SUS_DN is zenering,
                      eventually shorts DG. Replaced all 3 - -Vy now OK.

                      Y scan buffer test point does not follow YSUS output below -50V

                      Note: This unit seems to expect YSUS output to park at -Vy in between
                      drive signal pattern periods. A replacement drive signal board confirms this....
                      11-18-2021, 11:49 AM
                    • Truncatedhose
                      Help repair this relic? Philips 42PF7220A/37, pulsing buzz from YSUS
                      by Truncatedhose
                      Greetings all!

                      Originally this set had the usual messed up video symptoms such as: horizontal lines, weak, grainy video, bottom and top of picture differ in intensity of problem. It also seemed to slow to turn on or show the messed up picture.

                      Seemed like must be YScan/buffer board failure. Ordered buffer boards from my distributor which were supposed to be original/new and also from another distributor, I ordered the YSUS because I wanted to replace it for preventative maintenance. (also, the YSUS had a bulged cap, so there was even more reason to suspect it could...
                      07-04-2018, 10:59 AM
                    • zwarder
                      eax61319402 50PJ350 YSUS
                      by zwarder
                      Hi
                      Had shorted YSUS

                      Q24 RPJ63F3
                      C726 cap
                      Q11 K3667
                      R528 & R529 2.2 ohm

                      replaced all of these but still trips psu VS & VA are a bit low when ysus disconnected. IC301 does look a bit burnt however

                      ZSUS is also good as far as I can tell

                      Anyone could help me out on this one
                      10-23-2023, 08:11 AM
                    • pabloroggeri
                      Lenovo V360, no detect battery
                      by pabloroggeri
                      Hi friends!


                      It does not charge or detect the battery. At first it didn't start, I programmed the BIOS with the file that is in this forum and it turned on but it doesn't detect a battery. I need to try another bios that is not the one that is already published in the forum, I suspect that the one I recorded is corrupt, or incompatible in some detail and that is why it does not detect the battery. I did all the measurements on the charguer integrated circuit and they are all ok. I think the problem comes from the data BUS side. It is for this reason that I need a different...
                      07-28-2022, 08:18 AM
                    • tikanot
                      msi GP63 gtx not detect and keyboard mistake
                      by tikanot
                      Hello i have a msi GP63 and the gtx 1060 is not detect in the bios and not detect in windows , i have flash the vbios with programmer and same mistake, i have the ec do mistake with keyboard key not work or keyboard not work , i know i have to chance the ec but it's possible the ec do the gtx not detect in bios and in windows? i have check the voltage of the vga and it's good the die of the gpu is little hot at used
                      04-21-2022, 10:01 AM
                    • Loading...
                    • No more items.
                    Working...