VIZIO M470NV picture started flashing on and off then stayed off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • h82loseejr
    Senior Member
    • Oct 2015
    • 79
    • america

    #1

    VIZIO M470NV picture started flashing on and off then stayed off

    I was given this tv and was told it just did not work...plugged it in and it came right to life...after watching it for a few hours even wondered what could be wrong with it...it worked fine and had a great picutre...It ended up working for about 10 days then about 2 weeks ago sunday while watching football (of course) the picture (not backlights just the actual picture) started flashing on and off but the audio remained on. it did this about 10 or so times then when it would go off it stayed off for longer. so i took it apart and looked and was suprised how complex the t con was. i got online and found it was called a daugher board by shop jimmy so i went to ebay and ordered one with the same part number 3647-0022-0147 when it came in the new board had a part number of 3647-0022-0147 (4c) and pcb 0171-2272-0022. My board has same part number 3647-0022-0147 (2a) and pcb0171-2372-0024. Got to love ebay between being not clearly labled with whole part number and one really crappy picutre i ended up with wrong aprt...but i still installed it the tv turned on and got no startup screen then it flashed the backlights on and off a few times about 3 or so then it popped up with no input (was still bench testing it) so i caried it to the cable box and plugged hdmi in and when it turned on it flashed backlights a few times again and then the screen came on and was still flashing like it had been before...i forgot to mention in my haste to catch the end of 4th quarter of a close gaome when this problem first came up i also tried to push on the outside edges of the screen to see if this changed the display and it had absolutly no affect on its lack of picture or when it was flickering on.

    1 although i do need to do some voltage tests im assuming this is a mainboard issue and really dont have a whole lot of kowledge on dealing with them besides replacing the part as a uinit.

    2 could this be an EPROM issue they do sell them for the tv as i had looked the mainboards are really expensive and ebay only has a repair service that has a board trade in listed for this board havent really googled much further

    3 thanks you for time and any direction woudl be appreciated sorry for spelling and grammar was along week
    Attached Files
  • CapLeaker
    Leaking Member
    • Dec 2014
    • 8000
    • Canada

    #2
    Re: VIZIO M470NV picture started flashing on and off then stayed off

    To properly verify what happens, you have to make sure that all your voltages are good on the PSU. Then verify that the Tcon gets power (even when it cuts out), check that the panel gets power and check the LVDS signal with an oscilloscope (turn menu on / off all the time so you see a difference on the scope).

    Or take a shortcut and throw boards at it. Sometimes SJ has a complete board swap kit available for $80. It really depends on how far you are willing to go.

    Comment

    • Nick's Tvs
      Badcaps Veteran
      • Jan 2014
      • 621
      • USA

      #3
      Re: VIZIO M470NV picture started flashing on and off then stayed off

      This is typical of a bad main board for this model TV. We have seen this tv and this model many times in the past. Unfortunately since this tv is a bit older, almost all suppliers are out of stock on the main board unless you are willing to pay 300 for a refurbished one.

      Comment

      Related Topics

      Collapse

      • maricm
        Vizio m65-c1 picture flashing on and off on the screen
        by maricm
        HI all,
        hope someone point to the possible issue before I start buying replacement parts.
        Tv starts normal and responds to remote fine, PSU voltages mesured fine 19v was 18.9V under load and 19V with main board disconnected.
        Backlight stays on all the time,
        Sound works fine.
        screen keeps changing form black to full picture in about 1sec intervals.
        Picture looks fine with no visible artifacts.
        I have disconnected backlights and flashlight test confirmed that picture is still doing the same.


        Disconnecting left and right ribbons on...
        11-25-2023, 06:32 PM
      • DXseekerMO
        Vizio P502ui-B1E, delayed video, white flash, flashing picture UGH!!!
        by DXseekerMO
        About a week and a half ago this TV was traded in to me with the complaint: upon turning it on one morning a white blob slowly spread across the screen. Before I got it the TV had been sitting about 3 weeks. I also found the RF IN connector was missing. I turned it on for evaluation and got the splash screen/menus.

        I installed a 75ohm RF connector, repaired several bad grounds on the power board and chassis, checked all boards for loose screws and cleaned the entire inside of the TV. After all appeared well, the TV was tested for 40 hours and was subsequently put up for sale. ...
        05-07-2019, 07:20 PM
      • gavric
        Vizio M70-C3 Half picture is bad, main board on its last leg?
        by gavric
        Hello, i am working on Vizio M70-C3. It can hardly power on, it takes 15 power button presses or remote. Seems like eeprom problem that I seen before but all reading online says that this tv has power board or main board problem.

        When tv powers on vizio V logo shows nice on whole screen. picture 1
        When it goes into tv mode it only shows good picture on left side of screen, right is all scrabbled up. pic 2
        When i start youtube picture shows on left side fine, right is all scrambled. pic 2
        When i click video to start playing picture goes black(like when you change...
        09-02-2021, 08:55 PM
      • Super360
        Vizio E701i-A3 Vizio logo flashing then turns off
        by Super360
        Ok so here's the story. I was watching tv one day when all of a sudden I heard a pop from the back of the tv set and rushed to unplug the set. By this time the tv already had smoke coming out the back. It was not storming or inclement weather that day to cause a power surge to the best of my abilities. When I opened the tv up, I found that the three capacitors on the psu (highlighted in red) were all bulging and looked they had exploded. I replaced all of them right away and when I went to start up the tv after the "fix" it started just showing the flashing vizio logo as soon as power...
        07-25-2024, 07:06 PM
      • IAmOrion
        LG55UB850V no picture or audio, just flashing LED's help please?
        by IAmOrion
        Hi members, I came across this forum when searching a fault on my LG 55UB850V TV.
        Rather than hi-jack another members post/thread I thought I should start my own even though it's an almost identical issue.

        The thread I refer to can be found here:
        https://www.badcaps.net/forum/troubl...-s-help-please

        My boards are the same, and my issue it the same. I have NO Picture and NO Sound. Nothing. When first turning on the TV at the...
        01-28-2024, 06:50 PM
      • Loading...
      • No more items.
      Working...