Hello folks, I have a set here that I need some advice on.
It was brought to me with this story.
Big thunderstorm, lightning strike hit house next door, TV wouldn't work after that. The backlight is failed. It does not come on at all.
I have shined a flashlight on the display and see the No Signal text, so the panel is good and it's powering on.
I checked voltages on the power supply board going to the main board. All check out fine, aside from every 24V output, it is coming up as 15.5-16V.
Pictures are attached of the whole back opened up, the main & network boards, and the power board.
The power board part number is ADTVE3613XA6.
It was brought to me with this story.
Big thunderstorm, lightning strike hit house next door, TV wouldn't work after that. The backlight is failed. It does not come on at all.
I have shined a flashlight on the display and see the No Signal text, so the panel is good and it's powering on.
I checked voltages on the power supply board going to the main board. All check out fine, aside from every 24V output, it is coming up as 15.5-16V.
Pictures are attached of the whole back opened up, the main & network boards, and the power board.
The power board part number is ADTVE3613XA6.
Comment