Insignia NS-42PDP (LG 42X3) - Green Screen Problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • BlackSS
    New Member
    • Sep 2016
    • 4
    • Canada

    #1

    Insignia NS-42PDP (LG 42X3) - Green Screen Problem

    Hey guys I'm having trouble with this old tv I have in my sons room. I've had it since new in 2006. A few years ago the ZSUS board went bad and I replaced it. Even before the screen had the some red and green sparklies here and there. They seemed to mostly go away after the TV was on for awhile. This is not my main concern though.

    Over the past month the screen would randomly get washed out and have a lot of green. When the screen is normally black it would appear totally bright green. It seemed sometimes it would go back to normal and other times we'd have to let it cool down then it might for for a bit again. Now it's staying like this all the time. I've attached pics.

    I checked VS and VA voltage and VSC and -Vy. They were all close. I adjusted them around a bit with no change so I left them at spec. All the capacitors look ok, none are swelled or bulging. Also doesn't matter what input is used.

    Any help would be appriciated, thanks.
    Attached Files
    Last edited by BlackSS; 09-15-2016, 09:43 AM.

Related Topics

Collapse

  • jimjoe123
    LCD TV Green/Pink screen problem
    by jimjoe123
    I have a Dick Smith 37" LCD TV, Model GE6804. I am using it as PC extended monitor only.

    Problem is while watching tv, I hear a semi loud click(like a electrical breaker tripping due to overload, just sound like it but no actual electrical overload), then screen is covered with green or pink. I can still see the original picture image but overlayed by green or pink. See attached images. Pink.jpg is what I see, and Normal.jpg is before green or pink screen, What I captured was pink screen, but about 80% of time it's green and 20% of time it's pink.

    Then each time...
    02-23-2020, 01:29 AM
  • kokos
    LG 55EG910v (Green Nosie Screen) BURNT on NOT ?
    by kokos
    Hi ! to all fellows out there!

    I have an LG 55inch 55RG910V-ZB Curved TV. With the following problem: When I turn it ON with Remote I get a Green noise Screen (attached foto).
    I have tried reseating all ribons, Checked PSU 24V,12V,3v ,etc voltages.

    The TV opens on the first Green noise screen and it freezes there -no respone of menu keys ,etc -only on/off via Remote. (I also noticed carefully that except from green noise screen there is a ghost image at bottom and left vertical side)
    I tried connected the lan and I can seee TV via local lan (as a device I...
    02-26-2024, 10:48 AM
  • Ryan.man
    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
    by Ryan.man
    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
    02-04-2025, 12:23 PM
  • String2016
    samsung np300e green screen
    by String2016
    I need help on this samung np300e laptop, laptop turns on but the display green screen samsung logo and no bootable device shows but all green, I have replaced good lvds cable and good screen still problem persist.anyone encounter this problem please help
    07-26-2025, 04:00 AM
  • reformatt
    Macbook Air M2 A2681 Kernel panics after screen replacement
    by reformatt
    Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

    It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
    07-31-2025, 08:37 PM
  • Loading...
  • No more items.
Working...