Samsung un55d6000sf – Bad display or t-Con board?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ZRT
    New Member
    • Sep 2015
    • 4
    • USA
    #1

    Samsung un55d6000sf – Bad display or t-Con board?

    Hi, I'm wondering if someone could point me in the right direction to diagnose my Samsung un55d6000sf before I start throwing money at it. It has like a vertical scroll to it through any input and menus… it starts immediately when the Samsung logo comes up when powered on. No obvious signs on any of the boards as far as bad caps, burnt resistors, fuses etc…

    https://youtu.be/s0y_sa6FSo8
    Attached Files
    Tags: None
    • mmartell
      Badcaps Legend
      • Oct 2013
      • 3189
      • Canada
      #2
      Re: Samsung un55d6000sf – Bad display or t-Con board?

      Looks like a bad panel or tab bond issue to me.

        Comment

        • CapLeaker
          Leaking Member
          • Dec 2014
          • 7964
          • Canada
          #3
          Re: Samsung un55d6000sf – Bad display or t-Con board?

          I would disconnect one of the ribbon cables from the TCON to the LCD, then the other side.

            Comment

            • figurehead21
              New Member
              • Jul 2016
              • 6
              • United States
              #4
              Re: Samsung un55d6000sf – Bad display or t-Con board?

              double imaging is 99.9 % panel issue on these samsungs

                Comment

                • dick_barton
                  Badcaps Legend
                  • Aug 2015
                  • 6642
                  • Wales
                  #5
                  Re: Samsung un55d6000sf – Bad display or t-Con board?

                  It's generally a panel fault but you could try this quick fix.

                  https://www.youtube.com/watch?v=XZ6wjx8IpzM
                  Willing to help but I'm no expert.

                    Comment

                    • ZRT
                      New Member
                      • Sep 2015
                      • 4
                      • USA
                      #6
                      Re: Samsung un55d6000sf – Bad display or t-Con board?

                      If I unplug the right side of the T-Con the picture clears up on the other side. If I unplug the left, the picture remains scrambled on the opposing side.

                      Tried the tape trick and that was a no go.

                      So probably a bad display or tab bond issue?

                        Comment

                        • CapLeaker
                          Leaking Member
                          • Dec 2014
                          • 7964
                          • Canada
                          #7
                          Re: Samsung un55d6000sf – Bad display or t-Con board?

                          For me, it's a equal chance between tcon and panel.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Tynan Dill
                              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                              by Tynan Dill
                              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                              Upon bringing it home and plugging it up, it showed a standby light.

                              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                              The screen seems to blackout and stay black, but with a flashlight I can see the display.

                              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                              Assuming...
                              ORIGINAL POWER SUPPLY BOARD
                              7 Photos
                              11-22-2024, 01:46 PM
                            • advant
                              Driving a Sharp TCON/panel with a universal main board
                              by advant
                              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                              02-03-2020, 12:25 AM
                            • howardc64
                              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                              by howardc64
                              Problem

                              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                              08-04-2024, 10:36 PM
                            • m1ch43lzm
                              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                              by m1ch43lzm
                              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                              05-12-2025, 08:37 PM
                            • ohren
                              Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
                              by ohren
                              I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

                              I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

                              The models launched in 2018 and 2019 respectively....
                              09-08-2023, 05:24 PM
                            • Loading...
                            • No more items.
                            Working...