Re: Samsung PS-42D5S - LVDS Cable issue
Called Emos 5 times today, no reply, just get VM. No reply to my email either.
I count in total approx 15 missing SMD components across the board and 4 Electrolytic caps.
Any half decent inspection of this board would have shown it was not fit to send out to a customer. The board literally looks like scrap. Solder mask scratches everywhere.
I will wait another day for a reply and then just reverse the paypal charges.
edit -
I initially thought the missing components were limited to the board area around the LVDS connector which was severely damaged. On closer inspection there were SMD components missing from all 4 corners of the board. There was no pad damage or other obvious damage to the board other than the minor scratches that look like the board was stacked with others. The components literally looked neatly pulled with hot air from the board.
Rant over
Called Emos 5 times today, no reply, just get VM. No reply to my email either.
I count in total approx 15 missing SMD components across the board and 4 Electrolytic caps.
Any half decent inspection of this board would have shown it was not fit to send out to a customer. The board literally looks like scrap. Solder mask scratches everywhere.
I will wait another day for a reply and then just reverse the paypal charges.
edit -
I initially thought the missing components were limited to the board area around the LVDS connector which was severely damaged. On closer inspection there were SMD components missing from all 4 corners of the board. There was no pad damage or other obvious damage to the board other than the minor scratches that look like the board was stacked with others. The components literally looked neatly pulled with hot air from the board.
Rant over

Comment