Panasonic TC-P65VT30 Click Click Click

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Moreno83
    Badcaps Legend
    • Jun 2014
    • 2008
    • The Netherlands

    #21
    Re: Panasonic TC-P65VT30 Click Click Click

    You cant buy a new tv for $100 so its totally worth it. Picture quality is great.
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

    Comment

    • dzp1
      Member
      • Jul 2016
      • 13
      • United States

      #22
      Re: Panasonic TC-P65VT30 Click Click Click

      Originally posted by Moreno83
      You cant buy a new tv for $100 so its totally worth it. Picture quality is great.
      Agree! Thanks for your help!

      Comment

      • tw2005
        Badcaps Legend
        • Oct 2011
        • 6457
        • Australia

        #23
        Re: Panasonic TC-P65VT30 Click Click Click

        Originally posted by dzp1
        Sears Parts Direct is showing the two chips as in stock. I do not have access to an EEPROM reader - been a while since I've done that, but that would clearly be the easiest.
        something like this but the clip was really crappy and would suggest a new led with 3M or Pomona clip.

        I saved a 1 blinker A-board using this with bad eeprom data, copied from a good spare Board and reflashed the bad one. That was fun.

        Does series type 24 and 25 chips which you have to identify as the pin outs are different when setting that up.

        Pretty cheap even just for a bit of fun.

        Comment

        • dzp1
          Member
          • Jul 2016
          • 13
          • United States

          #24
          Re: Panasonic TC-P65VT30 Click Click Click

          Just wanted to close the loop on this. I sent in my A-board to PTS and they sent me back a refurbed A-board. Popped it in and the TV fired right up! I still have the A-board from the 55" and am waiting for the two ICs to arrive, but at this rate, I am thinking I may never get those ICs.

          Thanks for the help from everyone!

          Scott

          Comment

          • Moreno83
            Badcaps Legend
            • Jun 2014
            • 2008
            • The Netherlands

            #25
            Re: Panasonic TC-P65VT30 Click Click Click

            Glad it works again!
            I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • sam_sam_sam
              Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
              by sam_sam_sam
              I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

              This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

              After all of...
              07-13-2024, 08:14 PM
            • canadaboy25
              Panasonic TC-P54VT25 No image. A or D board?
              by canadaboy25
              I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

              The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

              I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
              01-17-2021, 01:06 AM
            • stecos
              Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
              by stecos
              Hi everyone!
              I happened several times, in the search for help from the web, to consult this very interesting forum.
              So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

              Having said that I come to the gist of my post on the forum as the title suggests.
              For my passion for technology I'm now collecting several...
              11-28-2022, 11:39 AM
            • Loading...
            • No more items.
            Working...