Re: RUNTK 5351TP No Picture Failure
Maybe, hopefully not the same case for mine if so Im out of luck.
Maybe, hopefully not the same case for mine if so Im out of luck.
-
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/ -
Re: RUNTK 5351TP No Picture Failure
The KL5T3067 can also fail? but its a good bet that if the VCC 3.3v is missing changing the ISL9860 will do the trick, As soon as there was a good supply of new boards. I stopped repairing them, with the customer paying repair cost I just brought new.Comment
-
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: RUNTK 5351TP No Picture Failure
I did read the above? I am just adding that if you do not have the VCC 3.3v the chances are its the ISL9860 that has failed or has not been fitted correctly.And not the KL5T3067 that is at faultComment
-
Re: RUNTK 5351TP No Picture Failure
reball . change again isl . still no image. any help ?Comment
-
Re: RUNTK 5351TP No Picture Failure
Its really hard to say with out the board here in front of me sorry :LPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: RUNTK 5351TP No Picture Failure
Well chaps good news here, replaced Ic200 and the set works
Will upload pictures of work later.
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: RUNTK 5351TP No Picture Failure
Hey is it the same board RUNTK 5351TP ZA and RUNTK 5351TP ZA model?
I need to order new board and i have ZA model but seller have only ZZ model...the quieter you become the more you are able to hear...Comment
-
Re: RUNTK 5351TP No Picture Failure
Hey i find new bard and install it, i get screen but have some lines. Any ideas what is this?Attached Files...the quieter you become the more you are able to hear...Comment
-
-
Re: RUNTK 5351TP No Picture Failure
Images coming soon totally forgot. Also RTStorm thats a failed panel them lines
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: RUNTK 5351TP No Picture Failure
But wheb i disconect one flat cabke the line are gone...the quieter you become the more you are able to hear...Comment
-
Re: RUNTK 5351TP No Picture Failure
Yeah thats because the shorted panel drive isnt getting power so it cant pull the lines up.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: RUNTK 5351TP No Picture Failure
IC100 KL5T3067
http://www.elforum.ro/topic/119716-t...40f5500/page-2The art of fighting without fightingComment
-
Re: RUNTK 5351TP No Picture Failure
Forgot to upload pics of this fix, here they are just forgot. One by one as Vbullet will not let me do more than one at a time on mobile device. First one is old Ic removed.Attached FilesPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
-
Re: RUNTK 5351TP No Picture Failure
Second Ic changed flux residue still present.Attached FilesLast edited by ReeceyBurger123; 01-21-2017, 01:17 PM.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
-
Re: RUNTK 5351TP No Picture Failure
Third is Ic with removed flux.Attached FilesPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
-
Re: RUNTK 5351TP No Picture Failure
Fourth pic is heatsink added to Ics.Attached FilesPlease Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
-
Re: RUNTK 5351TP No Picture Failure
5th is working image after I pc change, was preformed ages ago never did a vid and forgot to upload image
Attached FilesLast edited by ReeceyBurger123; 01-21-2017, 01:27 PM.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
-
Re: RUNTK 5351TP No Picture Failure
I think I'm having the exact same issue (ReeceyBurger just replied to my own thread just a few minutes ago - cheers
). I think I'll try measuring VCC 3.3 first with and without the buffers attached. If I get nothing, the ISL driver is most likely busted.
From what I read on the forum the other chap linked to (I fortunately speak native Romanian) I should also take readings of VGH and VGL, though I'm not entirely sure what they should normally read. Lots of info here, so hopefully I'll manage to pull though
EDIT: upon reading the Romanian forum thread more carefully, I noticed VGH and VGL should be around 35v and -6v respectively (or real close to that)...is this correct ? The fellow over there didn't have T-con issues after all, so I can trust those readings to be pretty close to what they should normally be - it was a shorted driver on the right side of the screen which dragged down the VGH bus.Wattevah...Comment
-
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode... -
Hi, I have a Samsung UE50TU with:
- sound and backlight, but no picture
- when it arrived, it had a picture for a few seconds
- it keeps rebooting
- without ribbon cable between the two panel boards, it does not reboot but I have no picture
- without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
- when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.
- without cable between mainboard and lcd panel and with a jumpered... -
I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started βfading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.
I ordered a supposedly βnew' Tcon board this time, and... -
Hello, Last week I bought the 50" Sony X80j tv everything was working fine, untill I plugged the tv in a ups power supply 650va the tv remote control became unresponsive and the TV became laggy after a while the picture quality isn't the same as before the tv seems less brighter and the picture is somehow blurry, people's faces don't look as natural as before, there is a mini orange-pink tint to the edge of people's faces especially in NETFLIX Dolby Vision like in One Piece ep1 Alvida skin tone, my intention was to protect the tv but something went wrong I checked the ups with a multimeter,...
Comment