Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Ohh ok, well ask them to make the room dark and see if the screen glows slightly.
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
No, fixed blue light. He told me that the tv had also a story
He bought this one as faullty with 3 red leds blinking, repaired 2 Fets on the ysus and than the blue led stays on but only fired up for a second or so, so he tought the ysus was faulty and order a new ysus in china but made no difference
(Seems almost the same as mine problem but mine have red leds blinking and that one not)
Hmm sounds like a mainboard ir cntrl board issue to me. Have you an rs232 wire ? If so I can guide you on how to run the test patterns on the Tv.
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Both those voltages are ok. Vadr would nominally be 75V, but a slightly lower figure would only cause maldischarge...not complete absence of image.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Hmm sounds like a mainboard ir cntrl board issue to me. Have you an rs232 wire ? If so I can guide you on how to run the test patterns on the Tv.
I have a rs232 wire but the TV is not with me, i will ask that he can deliver it here and than i will look again.
Haven't got the parts for order as i would like to order parts for both Kuro's at once as i need to order abroad and always pay high shipping costs for separate parts.
What about the panasonic TV, should it beat the kuro picture ?
Havnt seen a Panny but I would say Kuro would beat that one.
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
Comment