Does anyone know how to rollback the firmware in an LG TV without using the screen on the TV? I need to rollback the firmware but can't see the menus to change the DNS to fake it into to a downgrade.
Any suggestions?
Any suggestions?
-
-
Re: LG 47LW5600 Firmware Rollback - No Screen
Err--
Why do you want to downgrade...?
Is it because you installed a Wrong F/W in the first place--maybe looking for additional features that chassis did not come issued with....?
(Seems endemic--Ive seen a few sets lately that have been 'Upgraded'--And Bricked in the process--Never ends good after that....)
Only proper way is to pull the EEPROM and re-load with a flash-tool with the Correct F/W if you can get it, Not easy or quick as it'll be a SMD device.TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM! -
Re: LG 47LW5600 Firmware Rollback - No Screen
I am actually trying to use the board for another TV. They changed the firmware for one model. If I can revert the firmware I would be able to use this board in another TV that doesn't have a panel short.
Thanks for assuming I installed the incorrect firmware for this board.
What I need is a list of command to use and a way to get into these prompts for then TV in a linux platform.
I am thinking of using something from openLG to allow me to modify the firmware in a power only environment.
Yes I have the TV connected VIA RS232 Serial to USB
If anyone can get me some advise on a script or program to use for LG TV's that would be helpful.Comment
-
Re: LG 47LW5600 Firmware Rollback - No Screen
LG Firmware Info. In pictures.Attached FilesComment
-
-
Re: LG 47LW5600 Firmware Rollback - No Screen
The TV functions properly including the remote and sound. The only problem is the LCD panel is shorted on both sides and I can get a screen to come up to downgrade the software using other methods like DNS changing and faking it into think there is an upgrade.Last edited by hackintoshx86; 04-17-2016, 02:02 PM.Comment
-
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Hi,
I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on... -
Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same... -
Hello techs,
I need some help with printer.
I have the hp officejet pro 8022e and I'm trying to refill with ink the cartridges...
I have knowledge for laptop only and the printers arent my support.
Does anyone downgrade the firmware?
The firmware is like EC - BIOS reprogramming? or I can use other methods ...
Any support is perfect to me.
I was trying something like this.
Thank you in advance!!! -
Just had a customer bring in a HP 14s-fq1010nm to do some maintenance.
After updating the BIOS to the latest (F.35) I get black screen (no backlight turning on). However the backlight turns on if I connect an external display to HDMI, but when booting to Windows, both displays remain black.
After disconnecting internal LCD, and plugging in external display via HDMI, it works on external.
I tried downgrading it using official method - using an USB drive with older BIOS version, but it fails, saying that the BIOS files are corrupted. I used about 5 different older BIOS versions...
Comment