Vizio P50HDTV10A powers on no video

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Malachi
    Badcaps Legend
    • Dec 2015
    • 1077
    • Usa

    #1

    Vizio P50HDTV10A powers on no video

    Just picked this up for free. The set powers on, led is yellow on standby, when I press the power button, it turns green but nothing comes up on the display.
    Will post pics in a bit. Boards seem to be lg.
  • sordids999
    Badcaps Legend
    • May 2013
    • 2149
    • uk

    #2
    Re: Vizio P50HDTV10A powers on no video

    Posting pictures of the back of your tv showing the boards with clear pictures may help you more with fixing your problem

    Comment

    • Malachi
      Badcaps Legend
      • Dec 2015
      • 1077
      • Usa

      #3
      Re: Vizio P50HDTV10A powers on no video

      Here are the pictures. There are bulging caps on the pcs, with some showing leakage.
      This seems almost a clone of the P50pc3d I just fixed, it had bulging caps but it didnt completely solve the problem.
      Replacing the caps on that one allowed it to power on with some display and then with help from the forum, figured out it was the ysus.

      This one shows nothing on the screen.
      Attached Files

      Comment

      • Malachi
        Badcaps Legend
        • Dec 2015
        • 1077
        • Usa

        #4
        Re: Vizio P50HDTV10A powers on no video

        I think this picture of the back is better.
        Attached Files

        Comment

        • Malachi
          Badcaps Legend
          • Dec 2015
          • 1077
          • Usa

          #5
          Re: Vizio P50HDTV10A powers on no video

          Ok, I guess I should replace the caps then. No one seems to have an opinion.

          Comment

          • whiz62
            whiz62
            • Dec 2013
            • 242
            • usa

            #6
            Re: Vizio P50HDTV10A powers on no video

            I am by no means an expert, but I would for sure replace all bad caps and ESR test the others if you have a ESR meter.

            Comment

            • Malachi
              Badcaps Legend
              • Dec 2015
              • 1077
              • Usa

              #7
              Re: Vizio P50HDTV10A powers on no video

              I don't have an esr meter. I just ordered the bulging caps replacement from digikey.

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk

                #8
                Re: Vizio P50HDTV10A powers on no video

                This thread has some good info on regarding voltage testing etc maybe worth a read.
                https://www.badcaps.net/forum/showth...zio+P50HDTV10A

                Comment

                • Malachi
                  Badcaps Legend
                  • Dec 2015
                  • 1077
                  • Usa

                  #9
                  Re: Vizio P50HDTV10A powers on no video

                  Thanks vinceroger69, I had already tried disconnecting the Ysus then the Zsus and nothing changed.
                  I've already put the back on the TV and carried it out to the garage as we have company tomorrow for Easter and needed the room.
                  After I replace the caps, I'll install the psu and see if there is any difference. I'll then check those voltages if there us no change.
                  I had read that thread but being new at this I'm still kind of scared testing for voltage when I see numbers that high so I was waiting for advice. Lol

                  Comment

                  Related Topics

                  Collapse

                  • JaquesPratt
                    Vizio D32f-E1 Powers on, has backlight, won't boot/no logo, no menu or video
                    by JaquesPratt
                    I have a Vizio D32f-E1 LCD TV that does NOT have a TCON board.

                    This TV recently went through some 'death throes' and now won't boot. The first problem that began to manifest was while watching tv, the screen would 'freeze', and the image would dim over a few seconds until it was very dark. HOWEVER, the audio of the show would continue as normal. I could power off the TV for 5-20 seconds, power back on, and the video would be normal. This would occur 1-3 times when the TV was first started, and would not happen again after the TV was 'warmed up'. Not ideal, but this glitch was manageable....
                    07-16-2024, 01:04 AM
                  • Document Archive
                    HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera EliteDesk 800 i7-7700 Specification for Upgrade or Repair
                    by Document Archive
                    This specification for the HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera boardview and EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our...
                    09-12-2024, 02:00 PM
                  • Chivo77
                    DELL LATITUDE 5420, ST 20TFKN3, LA-K491P REV:2.0 (A01) powers on and die about 15 secs later, no video
                    by Chivo77
                    hello friends, I have a DELL LATITUDE 5420---MODEL P137G, ST 20TFKN3 LA-K491P REV:2.0 (A01) and its quite a challenge. It powers on with the battery disconnected, lasts on for about 15 secs, and then shuts off. It does the same with battery only (no adapter). With battery and adapter it sometimes starts after hitting the button several times. It displays nothing in every case. Since only the Boardview is available, I guided myself with schematics similar to this laptop (I'll add them down).Some measurements:

                    1- After receiving power SIO_SLP_S0# goes high and never changes.
                    2-every...
                    Today, 09:20 AM
                  • Tynan Dill
                    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                    by Tynan Dill
                    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                    Upon bringing it home and plugging it up, it showed a standby light.

                    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                    The screen seems to blackout and stay black, but with a flashlight I can see the display.

                    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                    Assuming...
                    11-22-2024, 01:46 PM
                  • sam_sam_sam
                    GeForce RTX2080 Super Aero video gaming card issues help need
                    by sam_sam_sam
                    This is from my son’s gaming computer that at first had minor overheating issues when playing a very intense game with it causing the computer to crash or reboot

                    Then bough a new motherboard and a new computer case that a cooling system in it already installed also brought the cooling system for this video card but now the issue with it is that it randomly rebooted screen goes blank randomly and suddenly video freezing or started with video being there then blank screen and then the video comes back or it just stays blank for a while and then maybe it will come back but it...
                    05-07-2023, 08:12 AM
                  • Loading...
                  • No more items.
                  Working...