Problem x-board on Samsung PS51E550OD1P

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

I finish the idea with this tv... ...

I change on the xboard 4 transistors... I checked all the diodes all the resistors, all the caps... And i haven't va and vs.... The problem isn't the power supply, because if i jumper vs with 5v i have the correctly V on the power supply...

With only the power supply, main board and xboard connected, the va and vs must be present? Or is another board that give the input on vs-on?

[ReeceyBurger123]

Re: Problem x-board on Samsung PS51E550OD1P

The power supplies in these are load variant meaning if the Sus boards are not connected they wont fire the Vs and Va. You need to check both Y and Xmain for S/C as they are connected together and one can kill the other.

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

ok them it's Normal that there isn't vs if y-board aren't connected... At this point there is another problem in y board

[ReeceyBurger123]

Re: Problem x-board on Samsung PS51E550OD1P

Have you checked the Vs line on the ymain for short circuit to ground like I originally said to do ?

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

Have you checked the Vs line on the ymain for short circuit to ground like I originally said to do ?

Sorry if i boring you, but i don't understand what kind of test i must to do...
With all disconnected on y board red probe in vs pin and black probe on chassis, with dmm in diode mode... Its right?

[Alastair E]

Re: Problem x-board on Samsung PS51E550OD1P

Not diode-mode, Resistance.
Tell us the resistance reading....

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

Red probe in vs anD black in chassis, i read 17.50 kohms

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

Sorry if i boring you, but i don't understand what kind of test i must to do...
With all disconnected on y board red probe in vs pin and black probe on chassis, with dmm in diode mode... Its right?

Is correct my test?

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

Anyone with other idea for what i must test?

[ReeceyBurger123]

Re: Problem x-board on Samsung PS51E550OD1P

Is that reading on the X or Y board ? Either way seems ok.

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

On y board

[ReeceyBurger123]

Re: Problem x-board on Samsung PS51E550OD1P

What about X ? That reading on the Y is normal.

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

On THE xboard, if i check the vs pin Where arrive the cable from the psu i read 196.3 kohms, if i check it on the connector Where i must plugin the second part of the X board, i haven't reading, always out of range

[Bibu]

Re: Problem x-board on Samsung PS51E550OD1P

Any suggest?