VESTEL FIRMWARE: Toshiba 32W1333B

[comptek]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Did a LUXOR 40" earlier It had the normal flashing LED and screen lights up then restarts re flashed it and all went well but the smart front screen is labled BUSH lol
and it picked up an update and still ok
thanks for the info and files

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Awesome glad to help

[jenna.jameson]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

I meant: thank You for this thread

[jenna.jameson]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

I humbly thank you for this post. It literally saved my life because I was able to unbrick Toshiba 32W1333DG which is being used by my supervisor. The future of my employment was in question but now it is not anymore :-)))) Internet live a full life thanks to friends like you. Best regards and I wish You all the best !

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

UPDATE ALL FOUND SOMTHING FOR YOU: This firmware works for ALL 17MB95 boards, the screen info is written to this but if you delete that you can use the Mboot to udpate the Tvs overall core firmware.

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Yay no worries

[badcaphunter]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Thank's ReeceyBurger for your firmware and instructions, saved another TV from the landfill.

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

No worries glad to help

[emadkareem1982]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Thanks for the effort

[dick_barton]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Good call

[huwants2no]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Updated firmware with USB and ReeceyBurgers' files (thanks buddy)
and Tosh32 is back to life
props for BADCAPS and everyone who helped out!!!!
think i got off lightly this time

[vinceroger69]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

No experience with this kind of DIY. Can you point me as to where i would find the C137 Cap that you say needs removing
thanks
Gonna try update the firmware now and see if that works...fingers crossed

can you upload a picture of that area of the board around the eeprom/flash ic
then we can point it out to you.

[huwants2no]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

I see quite a few of these,generally failed at around the 15 month mark.
Usual issues are duff led strips,and firmware crashes,total crap really.
The intermittent blinking after flashing is caused by a smd multilayer ceramic cap,and not failing flash ic's,as previously thought.directly above the letter "C" on C137,simply remove it.
Also worth remembering there are at least two different screen types fitted on these,along with the lvds socket being in different places on the mb95.
Another affliction is failure of D318/19/20,rendering a dead set.If you are unlucky,this can blow up the entire drive circuit for tr200,And that's where the real fun begins..lots of blown smd resistors,etc etc...About 8 different schematics for the 17IPS19-5,the one you want not being covered,And drawn out by a five year old,Totally useless!

No experience with this kind of DIY. Can you point me as to where i would find the C137 Cap that you say needs removing
thanks
Gonna try update the firmware now and see if that works...fingers crossed

[steviewonder]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

I see quite a few of these,generally failed at around the 15 month mark.
Usual issues are duff led strips,and firmware crashes,total crap really.
The intermittent blinking after flashing is caused by a smd multilayer ceramic cap,and not failing flash ic's,as previously thought.directly above the letter "C" on C137,simply remove it.
Also worth remembering there are at least two different screen types fitted on these,along with the lvds socket being in different places on the mb95.
Another affliction is failure of D318/19/20,rendering a dead set.If you are unlucky,this can blow up the entire drive circuit for tr200,And that's where the real fun begins..lots of blown smd resistors,etc etc...About 8 different schematics for the 17IPS19-5,the one you want not being covered,And drawn out by a five year old,Totally useless!

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

oops wrong thread!

Haha

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

No worries keep us updated, remember follow the steps exactly if not it will totaly mess the board up

[huwants2no]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

oops wrong thread!

[huwants2no]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Key note when updating, the firmware might fail again a few days after on the 17MB95 boards it will fail in the same way with flashing Led. If so you will need to redo the firmware for a second time normally after doing it twice it will be fixed properly. If not you will need to replace the SPI flash Ic and load the folders onto it.

Thanks for the info and obviously the files for the update
Will give it a go in the morning and post the results!

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Key note when updating, the firmware might fail again a few days after on the 17MB95 boards it will fail in the same way with flashing Led. If so you will need to redo the firmware for a second time normally after doing it twice it will be fixed properly. If not you will need to replace the SPI flash Ic and load the folders onto it.

[ReeceyBurger123]

Re: VESTEL FIRMWARE: Toshiba 32W1333B

Firmware File: